BES Up To 2022 $250-$5000 Products - (161414 Products)
Welding Helmet 10 with Headband
Item #: KB35101121
Manufacturer: 3M
Mfg #: 0404671974
Technical Specifications:
•Brand Name: 3M
•Description: Welding Helmet 10 with Headband
•Hazard Code: HAZ05
•Lens Shade: Variable 10-12
•Lens Type: Auto-Darkening Filter
•Model: 101121
•Type of Power: Lithium (CR-2032) Battery
•Window Height: 1.73
•Window Width: 3.66
Description:
•Features user-selectable dark shades 10 through 12, with light state of Shade 3
•Lightweight - approx. 13.8 oz including auto-darkening welding filter
•Viewing area: 3.66" x 1.73"
Shipping Info:
•HAZ 5C
•UPS Ground - No Additional Shipping Charges
•UPS Air - Cannot Ship Air
•Commercial Truck - Call for Shipping Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 1.7500
•Dimensions - Height: 10.3 Length: 11.0 Width: 11.0
•Additional handling -$15.00 per item
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0 - 12'' Measuring Range (.001" Grad.) - Dial Caliper - #52-025-112
Item #: NA5552025112
Manufacturer: Fowler
Mfg #: 52-025-112
Technical Specifications:
•Brand Name: Fowler
•Graduation: .001
•Measuring Range: 0 - 12
•Model Number: 52-025-112
•Type: Dial Caliper
Description:
•Large one-rev dial
•Depth rod
•Cross-jaws for direct internal measurement
•4-way measurement
•Stainless steel, satin chrome finish
•Includes wood case
Shipping Info:
•Actual Weight - 2.1500
•Dimensions - Height: 1.70 Length: 17.5 Width: 6.50
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® Heavy-Duty Offset Striking Wrench 3-1/16" - 12 Point
Item #: KP4218650
Manufacturer: Proto
Mfg #: J2649SW
Technical Specifications:
•Brand Name: Proto
•Finish: Black Oxide
•Model Number: J2649SW
•Overall Length: 16
•Point Size: 12
•Size: 3-1/16
Description:
•Black oxide finish
•Large striking surface for surer blow contact and more efficient transmittal of force to fastener.
•Short handle permits use in close quarters.
•Box opening designed to remain on fastener when wrench is struck.
•For use where extreme force is necessary to loosen or set large fasteners.
•Heavy box walls provide greater torque transmission.
•Offset handle clears obstructions.
Shipping Info:
•Actual Weight - 13.3700
•Dimensions - Height: 1.90 Length: 16.8 Width: 3.50
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT50 EM 1-1/4 ENDMILL HOLDERS
Item #: TG604590436
Manufacturer: Tungaloy
Mfg #: 4590436
Technical Specifications:
*Brand Name: Tungaloy
Description:
Shipping Info:
*Actual Weight - 12.9000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT50EM32X115
Item #: TG604529010
Brand: Tungaloy
Model #: 4529010
| Product Specifications | |
|---|---|
| Shank Type | Weldon |
| Connection Retention Knob Thread Size (CRKS) | M24 |
| Connection Diameter Workpiece Side (DCONWS) | 32 mm |
| Shank Size (SS) | 50 |
| Body Diameter (BD) | 72 mm |
| Tool Type | BT |
| Overall Length (OAL) | 115 mm |
| Body Length (LB) | 77 mm |
| Application | | Tapered shape interface | |
| Body Material | Steel |
| Measurement Type | Metric |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT50 EM 20X100 B ENDMILL HOLDERS
Item #: TG604511463
Manufacturer: Tungaloy
Mfg #: 4511463
Technical Specifications:
*Brand Name: Tungaloy
Description:
Shipping Info:
*Actual Weight - .0090
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT50 1.1/4 E/M HOLDER DIN
Item #: GM7350061250DIN
Manufacturer: Lyndex
Mfg #: C5006-1250
Technical Specifications:
*Brand Name: Lyndex
Description:
Shipping Info:
*Actual Weight - .9900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT50EM32X115E
Item #: TG604511530
Brand: Tungaloy
Model #: 4511530
| Product Specifications | |
|---|---|
| Connection Diameter Workpiece Side (DCONWS) | 32 mm |
| Connection Retention Knob Thread Size (CRKS) | M24 |
| Body Diameter (BD) | 72 mm |
| Shank Size (SS) | 50 |
| Overall Length (OAL) | 115 mm |
| Tool Type | BT |
| Application | | Tapered shape interface | |
| Body Length (LB) | 77 mm |
| Measurement Type | Metric |
| Body Material | Steel |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1/16 x 4 - Air Hardening Flat Stock
Item #: LY4557309
Manufacturer: Starrett
Mfg #: 57309
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 1/16
*Width: 4
Description:
*A-2 Air Hardening Ground Flat Stock 36" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - 2.5800
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2 x 2 x 18 - High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4269189
Manufacturer: Starrett
Mfg #: 69189
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: D-2
*Thick: 1/2
*Width: 2
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - 5.1000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1/2 x 2-1/2 - Oversize Air Hardening Flat Stock
Item #: LY753208
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: A-2
*Thick: 1/2
*Width: 2-1/2
Description:
*Oversize A-2 Air Hardening Ground Flat Stock
Shipping Info:
*Actual Weight - 13.2700
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 5/32 x 6 - Air Hardening Flat Stock
Item #: LY561014
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: A-2
*Thick: 5/32
*Width: 6
Description:
*A-2 Air Hardening Ground Flat Stock 36" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - 9.6700
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
T-Nut and Stud Set - #20612; 3/4-10 Stud Size; 7/8 T-Slot Size
Item #: SG5020612
Manufacturer: Te-Co
Mfg #: 20612
Technical Specifications:
*Brand Name: Te-Co
*Stud Size: 3/4-10
*Table T-Slot Size: 7/8
*Type: T-Nut and Stud Set
Description:
*Set Contains:
*4 Coupling nuts
*4 Flange nuts
*4 T-Slot nuts
*1 T-Slot cleaner
*24 studs, 4 each of: English Kits: 3, 4, 5, 6, 7 & 8" long
*1 Holder (wood)
Shipping Info:
*Actual Weight - 23.4540
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
WEX2030EL Milling Cutter
Item #: FJ132900602
Brand: Sumitomo
Model #: 2900602
| Product Specifications | |
|---|---|
| Cutting Diameter (DC/DCX) | 30 mm |
| Connection Diameter Machine Side (DCONMS) | 25 mm |
| Cutting Diameter (DC) | 30 mm |
| Master Insert Identification (MIID) | #12 |
| Cutting Item Count (CICT) | 2 |
| Head Length (LH) | 30 mm |
| Overall Length (OAL) | 170 mm |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2″ Dia. × 1/2″ Shank × 5/8″ DOC × 5″ OAL, Carbide TiB2, Spiral , 3 Flute, 38° Helix, Ballnose End Mill
Item #: DD9235011
Brand: KYOCERA SGS Precision Tools
Model #: 35011
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Flute Count (NOF) | 3 |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Flute Helix Angle (FHA) | 38 Degrees |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Usable Length (LU) | 1-5/8″ |
| Overall Length (OAL) | 5″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Style | Ball Nose |
| Coating | TiB2 |
| Decimal Equivalent | 0.5″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CM D.50-B-W.62
Item #: EH3100553
Brand: Iscar
Model #: 3100553
| Product Specifications | |
|---|---|
| Cutting Diameter (DC/DCX) | 1/2″ |
| Weight of Item (WT) | 0.32 Lbs |
| Cutting Diameter (DC) | 1/2″ |
| Head Length (LH) | 1.95″ |
| Cutting Item Count (CICT) | 2 |
| Tool Type | Ball nose endmills |
| Depth of Cut Maximum (APMX) | 0.29″ |
| Corner Radius (RE) | 1/4″ |
| Overall Length (OAL) | 4-1/2″ |
| Body Half Taper Angle (BHTA) | 3 Degrees |
| Shank Type | Weldon |
| Front Type | B |
| Ramping Angle Maximum (RMPX) | 90 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Application | | Profiling | |
| Measurement Type | Inch |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Body Material | Steel |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
WEX2028EL Milling Cutter
Item #: FJ132900600
Brand: Sumitomo
Model #: 2900600
| Product Specifications | |
|---|---|
| Cutting Diameter (DC/DCX) | 28 mm |
| Connection Diameter Machine Side (DCONMS) | 25 mm |
| Cutting Diameter (DC) | 28 mm |
| Master Insert Identification (MIID) | #12 |
| Cutting Item Count (CICT) | 2 |
| Head Length (LH) | 30 mm |
| Overall Length (OAL) | 170 mm |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Precision Cutting Tools 224 SERIES 2 FLUTE FOR ALUMINUM & NON FERROUS MATERIALS
Item #: CW8056823
Brand: Precision Cutting Tools
Model #: 9581952
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Grade | A5005 Exxtral Carbon (DLC) |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Peripheral Effective Cutting Edge Count (ZEFP) | 2 |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 4″ |
| Maximum Feed per Tooth (fz(max)) | 0.008 ″/tooth |
| Cutting Edge Material | Carbide |
| Minimum Feed per Tooth (fz(min)) | 0.004 ″/tooth |
| Coating | Ta-C |
| Length Group | Standard |
| Flute Count (NOF) | 2 |
| Shank Standard | h6 |
| Flute Helix Angle (FHA) | 45 Degrees |
| Body Material | Carbide |
| Shank Type | Round |
| Decimal Equivalent | 0.75″ |
| End Shape | Corner Radius |
| Measurement Type | Inch |
| Usable Length (LU) | 1-5/8″ |
| Series/List # | 224 |
| Application | | Finish | HEM | Semi Finish | |
| Shank Size (SS) | 3/4″ |
| Corner Radius (RE) | 0.06″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
M8x1.25 Carbide Threadform Tap E-code # T215M8
Item #: DH9147174127
Brand: Dormer
Model #: 7174127
| Product Specifications | |
|---|---|
| Tool Type | Form Taps |
| Thread Tolerance Class (TCTR) | 6HX |
| Thread Diameter Size (TDZ) | M8 |
| Tapping Prehole Diameter (Pre-hole) | 7.4 mm |
| Thread Pitch (TP) | 1.25 mm |
| Thread Standard | M |
| Overall Length (OAL) | 90 mm |
| Coating | TiCN |
| Thread Cutting Part Length (THL) | 22 mm |
| Measurement Type | Metric |
| Usable Length (LU) | 35 mm |
| Cutting Edge Material | HM |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Thread Size | M8 × 1.25 |
| Flute Count (NOF) | 5 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
DC 3/4″ x DCONMS 3/4″ x APMX 1-5/8″ x OAL 4″
Item #: CW8058032
Brand: Precision Cutting Tools
Model #: 9519652
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Grade | A5005 Exxtral Carbon (DLC) |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Tool Type | Solid Carbide Endmill |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| Length Group | Standard |
| Overall Length (OAL) | 4″ |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | Ta-C |
| Shank Standard | h6 |
| Flute Count (NOF) | 2 |
| Body Material | Carbide |
| Flute Helix Angle (FHA) | 45 Degrees |
| Decimal Equivalent | 0.75″ |
| Shank Type | Round |
| Measurement Type | Inch |
| Usable Length (LU) | 1-5/8″ |
| Series/List # | 224 |
| Application | | Finish | HEM | Semi Finish | |
| Maximum Feed per Tooth (fz(max)) | 0.008 ″/tooth |
| Corner Radius (RE) | 3/8″ |
| Minimum Feed per Tooth (fz(min)) | 0.004 ″/tooth |
| Number of Teeth | 2 |
| Shank Size (SS) | 3/4″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It