ET04: Abrasives, Clamping, Fasteners - (199857 Products)
Stanley Bostitch - 14 Gauge 1-1/2" Long Siding Nails for Power Nailers - Steel, Galvanized Finish, Ring Shank, Coil Wire Collation, Round Head, Blunt Diamond Point
Item #: 39069208
Brand: Stanley Bostitch
Model #: C4R80BDG
Exact Tooling IR#: 04
Features and Benefits
Siding nails are used for aesthetic purposes. They are used to install siding.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Ring shanks have a series of tapered rings that increase holding power. The top of each ring is wider than the bottom, which locks the nail in place and makes it difficult to remove.
| Product Specifications | |
|---|---|
| Type | Siding |
| Gauge | 14 |
| Length (Inch) | 1-1/2 |
| Material | Steel |
| Shank Type | Ring |
| Collation Type | Coil |
| Finish/Coating | Galvanized |
| Head Type | Round |
| Collation Material | Wire |
| For Use With | N63CP; N64C; N66C; N66BC |
| Collation Angle | 15.00 |
| Point Type | Blunt Diamond |
$78.98
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
DeWALT - 10 Gauge 0.137" Shank Diam 2-1/4" Long Concrete Nails for Power Nailers - Steel, Zinc Finish, Smooth Shank, Angled Stick Plastic Collation, Round Head
Item #: 38266748
Brand: DeWALT
Model #: DCN890225
Exact Tooling IR#: 04
Features and Benefits
Concrete cleats are used for attaching steel track to concrete, block or steel. They can also be used for attaching furring strips and plywood concrete and blocks.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Smooth shanks have completely smooth shanks. They require less energy to drive than nails with ring shanks but do not provide as much holding power.
| Product Specifications | |
|---|---|
| Type | Concrete |
| Gauge | 10 |
| Diameter (Decimal Inch) | 0.1370 |
| Length (Inch) | 2-1/4 |
| Material | Steel |
| Shank Type | Smooth |
| Collation Type | Angled Stick |
| Finish/Coating | Zinc |
| Head Type | Round |
| Collation Material | Plastic |
| For Use With | DCN890 Concrete Nailer |
$113.73
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Porter-Cable - 16 Gauge 2-1/2" Long Finishing Nails for Power Nailers - Grade 2 Steel, Galvanized Finish, Straight Stick Collation, Chisel Point
Item #: 74964040
Brand: Porter-Cable
Model #: PFN16250-1
Exact Tooling IR#: 04
Features and Benefits
Finishing nails are used in molding, millwork, baseboards and other finishing applications. They have a small head for countersinking to hide the nail head after it is driven.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
| Product Specifications | |
|---|---|
| Type | Finishing |
| Gauge | 16 |
| Length (Inch) | 2-1/2 |
| Material | Steel |
| Collation Type | Straight Stick |
| Finish/Coating | Galvanized |
| For Use With | D51256K; D51257K; DC616K; FN16250K-2; FN250B; FN250C; FP32; IM250ll; NT65A; NT65A2; NT65A3; NT65M; NT65M2; R250SFA; SB-1664FN; T250-F16; T250S-F16 |
| Point Type | Chisel |
| Material Grade | Grade 2 |
$11.96
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Stanley Bostitch - 18 Gauge 0.05" Shank Diam 2" Long Brad Nails for Power Nailers - Steel, Bright Finish, Ring Shank, Straight Stick Adhesive Collation, Brad Head, Chisel Point
Item #: 09825563
Brand: Stanley Bostitch
Model #: BT1350B-1M
Exact Tooling IR#: 04
Features and Benefits
Brad nails are thin finishing nails used to secure thin molding and trim. They have a very small head or no head at all.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Ring shanks have a series of tapered rings that increase holding power. The top of each ring is wider than the bottom, which locks the nail in place and makes it difficult to remove.
| Product Specifications | |
|---|---|
| Type | Brad |
| Gauge | 18 |
| Diameter (Decimal Inch) | 0.0500 |
| Length (Inch) | 2 |
| Material | Steel |
| Shank Type | Ring |
| Collation Type | Straight Stick |
| Finish/Coating | Bright |
| Head Type | Brad |
| Collation Material | Adhesive |
| For Use With | BTFP12233; SB-1842BN; SB-1850BN; BT35B; BT50B; BT200K-2; BT125K-2; GBT1850K |
| Point Type | Chisel |
$6.28
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Stanley Bostitch - 16 Gauge 1/16" Shank Diam 1-1/2" Long Finishing Nails for Power Nailers - Steel, Bright Finish, Smooth Shank, Straight Stick Adhesive Collation, Round Head, Chisel Point
Item #: 39039177
Brand: Stanley Bostitch
Model #: SB16-1.5-1M
Exact Tooling IR#: 04
Features and Benefits
Finishing nails are used in molding, millwork, baseboards and other finishing applications. They have a small head for countersinking to hide the nail head after it is driven.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Smooth shanks have completely smooth shanks. They require less energy to drive than nails with ring shanks but do not provide as much holding power.
| Product Specifications | |
|---|---|
| Type | Finishing |
| Gauge | 16 |
| Diameter (Decimal Inch) | 0.0625 |
| Length (Inch) | 1-1/2 |
| Material | Steel |
| Shank Type | Smooth |
| Collation Type | Straight Stick |
| Finish/Coating | Bright |
| Head Type | Round |
| Collation Material | Adhesive |
| For Use With | SB-1664FN; FN1664K; BTFP71917 |
| Point Type | Chisel |
$12.77
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Stanley Bostitch - 16 Gauge 1/16" Shank Diam 2" Long Finishing Nails for Power Nailers - Stainless Steel, Smooth Shank, Straight Stick Adhesive Collation, Round Head, Chisel Point
Item #: 39039136
Brand: Stanley Bostitch
Model #: SB1620SS
Exact Tooling IR#: 04
Features and Benefits
Finishing nails are used in molding, millwork, baseboards and other finishing applications. They have a small head for countersinking to hide the nail head after it is driven.
Stainless steel is highly corrosion-resistant and can be used in high-humidity or wet conditions. It has a higher heat tolerance than steel, allowing use at high temperatures.
Smooth shanks have completely smooth shanks. They require less energy to drive than nails with ring shanks but do not provide as much holding power.
| Product Specifications | |
|---|---|
| Type | Finishing |
| Gauge | 16 |
| Diameter (Decimal Inch) | 0.0625 |
| Length (Inch) | 2 |
| Material | Stainless Steel |
| Shank Type | Smooth |
| Collation Type | Straight Stick |
| Head Type | Round |
| Collation Material | Adhesive |
| For Use With | SB-1664FN; FN1664K; BTFP71917 |
| Point Type | Chisel |
$16.89
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Stanley Bostitch - 23 Gauge 0.0281" Shank Diam 3/4" Long Pin Nails for Power Nailers - Steel, Bright Finish, Smooth Shank, Straight Stick Adhesive Collation, Round Head, Diamond Point
Item #: 65210718
Brand: Stanley Bostitch
Model #: PT-2319-3M
Exact Tooling IR#: 04
Features and Benefits
Pin nails are smaller than brad nails. They are commonly used in furniture, millwork and cabinetry detailing where joints are glued in place.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Smooth shanks have completely smooth shanks. They require less energy to drive than nails with ring shanks but do not provide as much holding power.
| Product Specifications | |
|---|---|
| Type | Pin |
| Gauge | 23 |
| Diameter (Decimal Inch) | 0.0281 |
| Length (Inch) | 3/4 |
| Material | Steel |
| Shank Type | Smooth |
| Collation Type | Straight Stick |
| Finish/Coating | Bright |
| Head Type | Round |
| Collation Material | Adhesive |
| For Use With | TU-216-2330; HP118K |
| Point Type | Diamond |
$13.35
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Stanley Bostitch - 15 Gauge 0.07" Shank Diam 2-1/2" Long Finishing Nails for Power Nailers - Steel, Bright Finish, Smooth Shank, Angled Stick Adhesive Collation, Round Head, Chisel Point
Item #: 39039243
Brand: Stanley Bostitch
Model #: DA-1540-1M
Exact Tooling IR#: 04
Features and Benefits
Finishing nails are used in molding, millwork, baseboards and other finishing applications. They have a small head for countersinking to hide the nail head after it is driven.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Smooth shanks have completely smooth shanks. They require less energy to drive than nails with ring shanks but do not provide as much holding power.
| Product Specifications | |
|---|---|
| Type | Finishing |
| Gauge | 15 |
| Diameter (Decimal Inch) | 0.0700 |
| Length (Inch) | 2-1/2 |
| Material | Steel |
| Shank Type | Smooth |
| Collation Type | Angled Stick |
| Finish/Coating | Bright |
| Head Type | Round |
| Collation Material | Adhesive |
| For Use With | DA1564K; BTFP72155 |
| Collation Angle | 34.00 |
| Point Type | Chisel |
$18.70
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
DeWALT - 10 Gauge 2-1/2" Long Metal Connecting Nails for Power Nailers - Steel, Galvanized Finish, Smooth Shank, Angled Stick Collation, Round Head
Item #: 45997012
Brand: DeWALT
Model #: DMC14825HDG.5M
Exact Tooling IR#: 04
Features and Benefits
Metal connecting nails are used in joist hangers, framing anchors and braces in structural applications.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Smooth shanks have completely smooth shanks. They require less energy to drive than nails with ring shanks but do not provide as much holding power.
| Product Specifications | |
|---|---|
| Type | Metal Connecting |
| Gauge | 10 |
| Length (Inch) | 2-1/2 |
| Material | Steel |
| Shank Type | Smooth |
| Collation Type | Angled Stick |
| Finish/Coating | Galvanized |
| Head Type | Round |
| Collation Angle | 35.00 |
$27.23
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Stanley Bostitch - 11 Gauge 0.12" Shank Diam 3-1/4" Long Framing Nails for Power Nailers - Steel, Galvanized Finish, Screw Shank, Angled Stick Wire Collation, Round Head, Diamond Point
Item #: 55747828
Brand: Stanley Bostitch
Model #: S12DSGAL-FH
Exact Tooling IR#: 04
Features and Benefits
Framing nails are used to fasten joists, subfloors, sheathing, beams and other structural components.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
| Product Specifications | |
|---|---|
| Type | Framing |
| Gauge | 11 |
| Diameter (Decimal Inch) | 0.1200 |
| Length (Inch) | 3-1/4 |
| Material | Steel |
| Shank Type | Screw |
| Collation Type | Angled Stick |
| Finish/Coating | Galvanized |
| Head Type | Round |
| Collation Material | Wire |
| For Use With | N79WW; N80SB; N86S; N88WWB; N100S; F28WW; GF28WW |
| Collation Angle | 28.00 |
| Point Type | Diamond |
$107.24
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Stanley Bostitch - 0.12" Shank Diam 3-1/4" Long Framing Nails for Power Nailers - Plastic, Bright Finish, Smooth Shank, Angled Stick Plastic Collation, Round Head, Diamond Point
Item #: 88146816
Brand: Stanley Bostitch
Model #: RH-S12D120EP
Exact Tooling IR#: 04
Features and Benefits
Framing nails are used to fasten joists, subfloors, sheathing, beams and other structural components.
Plastic is an inexpensive, lightweight material ideal for light-duty applications. It not as strong and durable as steel or brass.
Smooth shanks have completely smooth shanks. They require less energy to drive than nails with ring shanks but do not provide as much holding power.
| Product Specifications | |
|---|---|
| Type | Framing |
| Diameter (Decimal Inch) | 0.1200 |
| Length (Inch) | 3-1/4 |
| Material | Plastic |
| Shank Type | Smooth |
| Collation Type | Angled Stick |
| Finish/Coating | Bright |
| Head Type | Round |
| Collation Material | Plastic |
| For Use With | F21PL; F21PL2; N88RH |
| Collation Angle | 21.00 |
| Point Type | Diamond |
$104.87
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Stanley Bostitch - 11 Gauge 0.131" Shank Diam 1-1/2" Long Metal Connecting Nails for Power Nailers - Steel, Galvanized Finish, Smooth Shank, Angled Stick Paper Tape Collation, Round Head, Diamond Point
Item #: 39050489
Brand: Stanley Bostitch
Model #: PT-MC13115G.5M
Exact Tooling IR#: 04
Features and Benefits
Metal connecting nails are used in joist hangers, framing anchors and braces in structural applications.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Smooth shanks have completely smooth shanks. They require less energy to drive than nails with ring shanks but do not provide as much holding power.
| Product Specifications | |
|---|---|
| Type | Metal Connecting |
| Gauge | 11 |
| Diameter (Decimal Inch) | 0.1310 |
| Length (Inch) | 1-1/2 |
| Material | Steel |
| Shank Type | Smooth |
| Collation Type | Angled Stick |
| Finish/Coating | Galvanized |
| Head Type | Round |
| Collation Material | Paper Tape |
| For Use With | F33PT; MCN-150; MCN-250 |
| Collation Angle | 35.00 |
| Point Type | Diamond |
$17.73
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
DeWALT - 9 Gauge 3-1/2" Long Framing Nails for Power Nailers - Steel, Bright Finish, Smooth Shank, Angled Stick Collation, Round Head
Item #: 45997251
Brand: DeWALT
Model #: DWS16D131-FH
Exact Tooling IR#: 04
Features and Benefits
Framing nails are used to fasten joists, subfloors, sheathing, beams and other structural components.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Smooth shanks have completely smooth shanks. They require less energy to drive than nails with ring shanks but do not provide as much holding power.
| Product Specifications | |
|---|---|
| Type | Framing |
| Gauge | 9 |
| Length (Inch) | 3-1/2 |
| Material | Steel |
| Shank Type | Smooth |
| Collation Type | Angled Stick |
| Finish/Coating | Bright |
| Head Type | Round |
| Collation Angle | 28.00 |
$63.19
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Porter-Cable - 16 Gauge 2-1/2" Long Finishing Nails for Power Nailers - Grade 2 Steel, Galvanized Finish, Smooth Shank, Straight Stick Collation, Chisel Point
Item #: 74964032
Brand: Porter-Cable
Model #: PFN16250
Exact Tooling IR#: 04
Features and Benefits
Finishing nails are used in molding, millwork, baseboards and other finishing applications. They have a small head for countersinking to hide the nail head after it is driven.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Smooth shanks have completely smooth shanks. They require less energy to drive than nails with ring shanks but do not provide as much holding power.
| Product Specifications | |
|---|---|
| Type | Finishing |
| Gauge | 16 |
| Length (Inch) | 2-1/2 |
| Material | Steel |
| Shank Type | Smooth |
| Collation Type | Straight Stick |
| Finish/Coating | Galvanized |
| For Use With | D51256K; DC612KA; DC616K; DC616KA; FN16250K-2; FN250B; FP32; IM250ll; NT65A; NT65A2; NT65A3; NT65M; NT65M2; R250SFA; SB-1664FN; T250-F16; T250S-F16 |
| Point Type | Chisel |
| Material Grade | Grade 2 |
$27.81
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
DeWALT - 11 Gauge 2.38" Long Roofing Nails for Power Nailers - Steel, Bright Finish, Smooth Shank, Coil Collation, Round Head, Blunt Diamond Point
Item #: 45996949
Brand: DeWALT
Model #: DWC8P120D
Exact Tooling IR#: 04
Features and Benefits
Roofing nails are typically shorter in length than other nail types. They are used to install roofing felt, shingles, roofing tile and sheet metal.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Smooth shanks have completely smooth shanks. They require less energy to drive than nails with ring shanks but do not provide as much holding power.
| Product Specifications | |
|---|---|
| Type | Roofing |
| Gauge | 11 |
| Length (Inch) | 2.3800 |
| Material | Steel |
| Shank Type | Smooth |
| Collation Type | Coil |
| Finish/Coating | Bright |
| Head Type | Round |
| Collation Angle | 15.00 |
| Point Type | Blunt Diamond |
$34.75
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Stanley Bostitch - 18 Gauge 0.05" Shank Diam 1-5/8" Long Brad Nails for Power Nailers - Steel, Bright Finish, Ring Shank, Straight Stick Adhesive Collation, Brad Head, Chisel Point
Item #: 59829960
Brand: Stanley Bostitch
Model #: BT1342B-1M
Exact Tooling IR#: 04
Features and Benefits
Brad nails are thin finishing nails used to secure thin molding and trim. They have a very small head or no head at all.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Ring shanks have a series of tapered rings that increase holding power. The top of each ring is wider than the bottom, which locks the nail in place and makes it difficult to remove.
| Product Specifications | |
|---|---|
| Type | Brad |
| Gauge | 18 |
| Diameter (Decimal Inch) | 0.0500 |
| Length (Inch) | 1-5/8 |
| Material | Steel |
| Shank Type | Ring |
| Collation Type | Straight Stick |
| Finish/Coating | Bright |
| Head Type | Brad |
| Collation Material | Adhesive |
| For Use With | BTFP12233; SB-1842BN; SB-1850BN; BT35B; BT50B; BT200K-2; BT125K-2; GBT1850K |
| Point Type | Chisel |
$5.51
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Stanley Bostitch - 23 Gauge 0.0281" Shank Diam 1-3/16" Long Pin Nails for Power Nailers - Steel, Bright Finish, Smooth Shank, Straight Stick Adhesive Collation, Round Head, Diamond Point
Item #: 76303775
Brand: Stanley Bostitch
Model #: PT-2330-3M
Exact Tooling IR#: 04
Features and Benefits
Pin nails are smaller than brad nails. They are commonly used in furniture, millwork and cabinetry detailing where joints are glued in place.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Smooth shanks have completely smooth shanks. They require less energy to drive than nails with ring shanks but do not provide as much holding power.
| Product Specifications | |
|---|---|
| Type | Pin |
| Gauge | 23 |
| Diameter (Decimal Inch) | 0.0281 |
| Length (Inch) | 1-3/16 |
| Material | Steel |
| Shank Type | Smooth |
| Collation Type | Straight Stick |
| Finish/Coating | Bright |
| Head Type | Round |
| Collation Material | Adhesive |
| For Use With | TU-216-2330; HP118K |
| Point Type | Diamond |
$14.29
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Porter-Cable - 15 Gauge 2" Long Finishing Nails for Power Nailers - Grade 2 Steel, Galvanized Finish, Angled Stick Collation, Chisel Point
Item #: 81149643
Brand: Porter-Cable
Model #: PDA15200G
Exact Tooling IR#: 04
Features and Benefits
Finishing nails are used in molding, millwork, baseboards and other finishing applications. They have a small head for countersinking to hide the nail head after it is driven.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
| Product Specifications | |
|---|---|
| Type | Finishing |
| Gauge | 15 |
| Length (Inch) | 2 |
| Material | Steel |
| Collation Type | Angled Stick |
| Finish/Coating | Galvanized |
| For Use With | Cordless Finish 41; D51275K; D51276K; DA250B; DA250C; DC628K; FP35; FP41XP; FP42XP; NT65AA; NT65MA2; SFN30 |
| Collation Angle | 34.00 |
| Point Type | Chisel |
| Material Grade | Grade 2 |
$72.42
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Stanley Bostitch - 11 Gauge 0.131" Shank Diam 3-1/4" Long Framing Nails for Power Nailers - Steel, Bright Finish, Smooth Shank, Angled Stick Paper Tape Collation, Round Head
Item #: 36134815
Brand: Stanley Bostitch
Model #: PT-12D131FH25
Exact Tooling IR#: 04
Features and Benefits
Framing nails are used to fasten joists, subfloors, sheathing, beams and other structural components.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Smooth shanks have completely smooth shanks. They require less energy to drive than nails with ring shanks but do not provide as much holding power.
| Product Specifications | |
|---|---|
| Type | Framing |
| Gauge | 11 |
| Diameter (Decimal Inch) | 0.1310 |
| Length (Inch) | 3-1/4 |
| Material | Steel |
| Shank Type | Smooth |
| Collation Type | Angled Stick |
| Finish/Coating | Bright |
| Head Type | Round |
| Collation Material | Paper Tape |
| For Use With | Most 30 to 34 Degree Paper Tape Nailers |
| Collation Angle | 33.00 |
$67.94
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Stanley - 18 Gauge 3/4" Long Brad Nails for Power Nailers - Steel, Galvanized Finish, Straight Stick Collation, Brad Head, Chisel Point
Item #: 89494355
Brand: Stanley
Model #: SWKBN075
Exact Tooling IR#: 04
Features and Benefits
Brad nails are thin finishing nails used to secure thin molding and trim. They have a very small head or no head at all.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
| Product Specifications | |
|---|---|
| Type | Brad |
| Gauge | 18 |
| Length (Inch) | 3/4 |
| Material | Steel |
| Collation Type | Straight Stick |
| Finish/Coating | Galvanized |
| Head Type | Brad |
| For Use With | A125BN; A200BN; BN125; BN200; BT125; BT200; BT35B; SB-1842BN; SB-1850BN; SLP20; SWK-125BN; TRE500; Task Force 181499 |
| Point Type | Chisel |
$2.04
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It