Machinery > Drill Presses & Tapping Machines (ET04) - (138 Products)
Machinery > Drill Presses & Tapping Machines (ET04)
Brand: Value Collection / Part #: TPR-1100
Item #: 09512971
Brand: Value Collection
Model #: TPR-1100
Product Specifications
| Spindle Taper Size | 4MT |
| Column Diameter | 10 in |
| Column Diameter (Inch) | 10 |
| Column Diameter (Decimal Inch) | 10.0000 |
$41,602.88
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Vectrax / Part #: MDP-25VS
Item #: 54497656
Brand: Vectrax
Model #: MDP-25VS
Product Specifications
| Swing Distance | 16 in |
| Swing Distance (Decimal Inch) | 16.0000 |
| Swing Distance (Inch) | 16 |
| Spindle Speed Control | Variable Speed |
| Phase | Single |
| Spindle Taper Size | 3MT |
| Minimum Spindle Speed (RPM) | 150 |
| Maximum Spindle Speed (RPM) | 3000 |
| Spindle Travel Length (Decimal Inch) | 5.3000 |
| Drilling Capacity in Steel (Inch) | 1 |
| Drilling Capacity in Cast Iron (Inch) | 1-1/4 |
| Drilling Capacity In Steel | 1 in |
| Base Length (Inch) | 27 |
| Base Length (Decimal Inch) | 27.0000 |
| Base Width | 19 in |
| Base Length | 27 in |
$3,606.08
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Jet - 10-7/16" Swing, Variable Speed Pulley Drill Press - Variable Speed, 2 hp, Three Phase
Item #: 30434898
Brand: Jet
Model #: 354231
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Variable speed pulleys are driven by a V-shaped belt system and a variable speed assembly that regulates an infinite speed range change by the turn of a dial.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill Press |
| Swing Distance (Inch) | 10-7/16 |
| Spindle Speed Control | Variable Speed Pulley |
| Phase | 3 |
| Spindle Taper Size | 3MT |
| Spindle Travel Length (Inch) | 6 |
| Horsepower (HP) | 2 |
| Voltage | 230/460 |
| Minimum Spindle Speed (RPM) | 300 |
| Maximum Spindle Speed (RPM) | 2000 |
| Drilling Capacity in Steel (Inch) | 1-3/8 |
| Drilling Capacity in Cast Iron (Inch) | 1-1/2 |
| Number of Spindle Speeds | variable |
| Spindle to Table Distance (Inch) | 30-1/4 |
$5,107.41
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Jet - 10-7/16" Swing, Variable Speed Pulley Drill & Tap Press - Variable Speed, 2 hp, Three Phase
Item #: 39394291
Brand: Jet
Model #: 354240
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill and tap presses are gear headed machines with forward and reversing spindles specifically for drilling and tapping operations.
Variable speed pulleys are driven by a V-shaped belt system and a variable speed assembly that regulates an infinite speed range change by the turn of a dial.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill & Tap Press |
| Swing Distance (Inch) | 10-7/16 |
| Spindle Speed Control | Variable Speed Pulley |
| Phase | 3 |
| Spindle Taper Size | 3MT |
| Spindle Travel Length (Inch) | 6 |
| Horsepower (HP) | 2 |
| Voltage | 230 |
| Minimum Spindle Speed (RPM) | 150 |
| Maximum Spindle Speed (RPM) | 2000 |
| Drilling Capacity in Steel (Inch) | 1-3/8 |
| Drilling Capacity in Cast Iron (Inch) | 1-1/2 |
| Tapping Capacity in Steel (Inch) | 5/8 |
| Tapping Capacity in Cast Iron (Inch) | 3/4 |
| Number of Spindle Speeds | variable |
| Spindle to Table Distance (Inch) | 30-1/4 |
$7,055.72
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Enco - 346mm Swing, Step Pulley Drill Press - 16 Speed, 3/4 hp, Single Phase
Item #: 32752487
Brand: Enco
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Step pulleys are driven by a belt system that is manually changed to achieve a range of fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill Press |
| Swing Distance (mm) | 346.00 |
| Swing Distance (Decimal Inch) | 13.6220 |
| Spindle Speed Control | Step Pulley |
| Phase | 1 |
| Spindle Taper Size | 2MT |
| Spindle Travel Length (mm) | 80.00 |
| Spindle Travel Length (Decimal Inch) | 3.1496 |
| Horsepower (HP) | 3/4 |
| Voltage | 115 |
| Minimum Spindle Speed (RPM) | 240 |
| Maximum Spindle Speed (RPM) | 3300 |
| Drilling Capacity in Steel (mm) | 16.00 |
| Drilling Capacity in Cast Iron (mm) | 18.00 |
| Maximum Chuck Capacity (mm) | 16.00 |
| Radial Head | NonRadial Head |
| Number of Spindle Speeds | 16 |
| Spindle to Table Distance (mm) | 670.00 |
| Spindle to Table Distance (Decimal Inch) | 26.3780 |
| Minimum Spindle to Column Distance (Inch) | 6.8110 |
| Spindle to Column Distance (Inch) | 173 |
| Table Length (Decimal Inch) | 11.4173 |
| Table Length (mm) | 290.00 |
| Table Width/Diameter (mm) | 290.00 |
| Table Width/Diameter (Decimal Inch) | 11.4173 |
| Table Load Capacity (Lb.) | 20.00 |
| Table Slot Size (mm) | 16 |
| Table Slot Size (Decimal Inch) | 0.6299 |
| Table Tilt (Degrees) | 45.00 |
| Base Length (mm) | 460.00 |
| Base Length (Decimal Inch) | 18.1102 |
| Column Diameter (Decimal Inch) | 2.7559 |
| Column Diameter (mm) | 70.00 |
| Overall Length (mm) | 580.00 |
| Overall Length (Decimal Inch) | 22.8346 |
| Overall Height (mm) | 1600 |
| Overall Height (Decimal Inch) | 63.00 |
| Overall Depth (Decimal Inch) | 13.7795 |
| Overall Depth (mm) | 350.00 |
$878.49
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Clausing - 85-1/2 Inch Long x 25-1/2 Inch Deep x 29-1/2 Inch High, Drill Press Production Table - Accomodates 3 Heads and Column Assembly
Item #: 80201098
Brand: Clausing
Model #: 20-503
Exact Tooling IR#: 04
| Product Specifications | |
|---|---|
| Product Type | Production Table |
| Machine Compatibility | 3 Head & Column Assemblies |
| Overall Height (Decimal Inch) | 29.500 |
| Overall Depth (Decimal Inch) | 25.5000 |
| Overall Length (Decimal Inch) | 85.5000 |
$4,651.96
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Clausing - 37.4" Swing, Geared Head Radial Arm Drill Press - 6 Speed, 2 hp, Three Phase
Item #: 91614420
Brand: Clausing
Model #: CL920A
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Radial arm drill presses are designed for drilling and boring large holes in hard to reach areas as well as countersinking and grinding. The head of the radial drill can be moved, height adjusted and rotated. The spindle can withstand heavy duty operations.
Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Radial Arm Drill Press |
| Swing Distance (Decimal Inch) | 37.4000 |
| Spindle Speed Control | Geared Head |
| Phase | 3 |
| Spindle Taper Size | 4MT |
| Spindle Travel Length (Decimal Inch) | 8.6600 |
| Horsepower (HP) | 2 |
| Voltage | 230/460 |
| Minimum Spindle Speed (RPM) | 88 |
| Maximum Spindle Speed (RPM) | 1500 |
| Drilling Capacity in Steel (Inch) | 1-17/64 |
| Drilling Capacity in Cast Iron (Inch) | 2 |
| Tapping Capacity in Steel (Decimal Inch) | 1.0000 |
| Tapping Capacity in Cast Iron (Decimal Inch) | 1.2600 |
| Maximum Chuck Capacity (Decimal Inch) | 0.7500 |
| Radial Head | Radial Head |
| Number of Spindle Speeds | 6 |
| Power Downfeed Rate | 0.002 |
| Spindle to Table Distance (Decimal Inch) | 47.6000 |
| Minimum Spindle to Column Distance (Inch) | 8-21/32 |
| Spindle to Column Distance (mm) | 950.00 |
| Spindle to Column Distance (Decimal Inch) | 37.4000 |
| Table Length (Decimal Inch) | 35.5000 |
| Table Width/Diameter (Decimal Inch) | 25.3000 |
| Table Tilt (Degrees) | 45.00 |
| Base Length (Decimal Inch) | 49.6000 |
| Base Width (Decimal Inch) | 25.2000 |
| Base Depth (Decimal Inch) | 6.5000 |
| Column Diameter (Decimal Inch) | 8.2800 |
| Radial Arm Length (Inch) | 37 |
| Radial Arm Length (Feet) | 3.00 |
| Overall Length (Decimal Inch) | 71.1000 |
| Overall Height (Decimal Inch) | 86.25 |
| Overall Depth (Inch) | 32-1/2 |
| Includes | Box Table; Operations & Parts Manual; Tool Kit |
$20,760.86
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Baileigh - Floor & Bench Drill Presses Stand Type: Floor Machine Type: Drill & Tap Press
Item #: 36768174
Brand: Baileigh
Model #: DP-1000VS
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill and tap presses are gear headed machines with forward and reversing spindles specifically for drilling and tapping operations.
Variable speed pulleys are driven by a V-shaped belt system and a variable speed assembly that regulates an infinite speed range change by the turn of a dial.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors.
Product Specifications
Floor & Bench Drill Presses; Stand Type: Floor ; Machine Type: Drill & Tap Press ; Swing Distance (Inch): 16 ; Spindle Speed Control: Variable Speed Pulley ; Phase: 1 ; Spindle Taper Size: 3MT
| Stand Type | Floor |
| Machine Type | Drill & Tap Press |
| Swing Distance (Inch) | 16 |
| Spindle Speed Control | Variable Speed Pulley |
| Phase | 1 |
| Spindle Taper Size | 3MT |
| Spindle Travel Length (Decimal Inch) | 5.3000 |
| Horsepower (HP) | 2 |
| Voltage | 220 |
| Minimum Spindle Speed (RPM) | 150 |
| Maximum Spindle Speed (RPM) | 3000 |
| Drilling Capacity in Steel (Inch) | 1 |
| Drilling Capacity in Cast Iron (Inch) | 1-1/4 |
| Tapping Capacity in Steel (Inch) | 5/8 |
| Tapping Capacity in Steel (Decimal Inch) | 0.6250 |
| Tapping Capacity in Cast Iron (Inch) | 3/4 |
| Tapping Capacity in Cast Iron (Decimal Inch) | 0.7500 |
| Maximum Chuck Capacity (Decimal Inch) | 2.4400 |
| Number of Spindle Speeds | variable |
| Spindle to Table Distance (Decimal Inch) | 23.8000 |
| Table Length (Decimal Inch) | 27.0000 |
| Table Width/Diameter (Decimal Inch) | 19.0000 |
| Table Slot Size (Decimal Inch) | 0.6250 |
| Base Length (Decimal Inch) | 32.0000 |
| Column Diameter (Decimal Inch) | 3.6200 |
| Overall Length (Decimal Inch) | 32.0000 |
| Overall Depth (Decimal Inch) | 24.0000 |
$4,877.38
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Jet - 20" Swing, Variable Speed Pulley Drill & Tap Press - Variable Speed, 2 hp, Three Phase
Item #: 55757066
Brand: Jet
Model #: 354226
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill and tap presses are gear headed machines with forward and reversing spindles specifically for drilling and tapping operations.
Variable speed pulleys are driven by a V-shaped belt system and a variable speed assembly that regulates an infinite speed range change by the turn of a dial.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill & Tap Press |
| Swing Distance (Inch) | 20 |
| Spindle Speed Control | Variable Speed Pulley |
| Phase | 3 |
| Spindle Taper Size | 3MT |
| Spindle Travel Length (Inch) | 6 |
| Spindle Travel Length (Decimal Inch) | 6.0000 |
| Horsepower (HP) | 2 |
| Voltage | 460 |
| Minimum Spindle Speed (RPM) | 65; 245 |
| Maximum Spindle Speed (RPM) | 2000; 540 |
| Drilling Capacity in Steel (Inch) | 1-3/8 |
| Drilling Capacity in Cast Iron (Inch) | 7/8 |
| Number of Spindle Speeds | variable |
| Spindle to Table Distance (Inch) | 30-1/4 |
| Spindle to Table Distance (Decimal Inch) | 30.2500 |
| Table Length (Inch) | 22 |
| Table Width/Diameter (Inch) | 18-3/4 |
| Table Load Capacity (Lb.) | 154.00 |
| Table Slot Size (Decimal Inch) | 7.4370 |
| Base Length (Inch) | 27 |
| Base Width (Decimal Inch) | 19.0000 |
| Base Depth (Inch) | 19 |
| Column Diameter (Inch) | 4-1/2 |
$6,483.51
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Enco - 4-5/16" Swing, Step Pulley Drill Press - 3 Speed, Single Phase
Item #: 77751899
Brand: Enco
Exact Tooling IR#: 04
Features and Benefits
Bench drill presses, also known as bench top, are stationary presses that are mounted to a workbench. They are used for precision applications, on smaller workpieces and where limited space is a concern.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Step pulleys are driven by a belt system that is manually changed to achieve a range of fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors.
| Product Specifications | |
|---|---|
| Stand Type | Bench |
| Machine Type | Drill Press |
| Swing Distance (Inch) | 4-5/16 |
| Spindle Speed Control | Step Pulley |
| Phase | 1 |
| Spindle Taper Size | 1JT |
| Voltage | 115 |
| Minimum Spindle Speed (RPM) | 5000 |
| Maximum Spindle Speed (RPM) | 8500 |
| Maximum Chuck Capacity (Inch) | 1/4 |
| Radial Head | NonRadial Head |
| Number of Spindle Speeds | 3 |
| Base Length (Inch) | 9-3/8 |
| Base Width (Inch) | 6-11/16 |
| Overall Height (Inch) | 15-3/4 |
$455.24
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Dake - 18" Swing, Frequency Drill Press - Variable Speed, 1-1/2 hp, Single Phase
Item #: 41731951
Brand: Dake
Model #: 977700
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Frequency drive systems are similar to variable speed pulleys, but the speed is controlled electronically with fewer moving parts. These drive systems feature several speeds within a specified speed range.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill Press |
| Swing Distance (Inch) | 18 |
| Spindle Speed Control | Frequency |
| Phase | 1 |
| Spindle Taper Size | 3MT |
| Spindle Travel Length (Inch) | 5 |
| Horsepower (HP) | 1.5 |
| Voltage | 110 |
| Maximum Spindle Speed (RPM) | 68/1380 |
| Drilling Capacity in Steel (Inch) | 1 |
| Number of Spindle Speeds | variable |
| Column Diameter (Inch) | 3-5/8 |
| Overall Height (Inch) | 71 |
$4,890.60
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Jet - 20" Swing, Step Pulley Drill Press - 12 Speed, 1-1/2 hp, Single Phase
Item #: 88429147
Brand: Jet
Model #: 354170
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Step pulleys are driven by a belt system that is manually changed to achieve a range of fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill Press |
| Swing Distance (Inch) | 20 |
| Spindle Speed Control | Step Pulley |
| Phase | 1 |
| Spindle Taper Size | 3MT |
| Spindle Travel Length (Inch) | 4-5/8 |
| Horsepower (HP) | 1.5 |
| Voltage | 115/230 |
| Minimum Spindle Speed (RPM) | 150 |
| Maximum Spindle Speed (RPM) | 4200 |
| Drilling Capacity in Steel (Inch) | 3/4 |
| Drilling Capacity in Cast Iron (Inch) | 1 |
| Radial Head | NonRadial Head |
| Number of Spindle Speeds | 12 |
| Spindle to Table Distance (Inch) | 29-1/8 |
| Spindle to Column Distance (Inch) | 10 |
| Table Length (Inch) | 18-1/2 |
| Table Width/Diameter (Inch) | 16 |
| Table Load Capacity (Lb.) | 80.00 |
| Table Slot Size (Inch) | 1/2 |
| Table Tilt (Degrees) | 45.00 |
| Base Length (Decimal Inch) | 22.7500 |
| Base Length (Inch) | 22-3/4 |
| Base Width (Inch) | 13-3/4 |
| Column Diameter (Inch) | 3-3/8 |
| Overall Length (Inch) | 31-1/2 |
| Overall Height (Inch) | 66 |
| Overall Depth (Inch) | 18-1/2 |
| Includes | Drill Chuck; Key |
$1,484.01
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Palmgren - Tapping Arms Speed (RPM): 700.00 Arm Reach (Inch): 62
Item #: 56852551
Brand: Palmgren
Model #: 9680401
Exact Tooling IR#: 04
Product Specifications
Tapping Arms; Speed (RPM): 700.00 ; Arm Reach (Inch): 62 ; Maximum Tapping Capacity in Mild Steel (Inch): 3/8 ; Maximum Tapping Capacity in Aluminum (Inch): 1/2 ; Tooling Style: WES1 ; Power Type: Pneumatic
| Speed (RPM) | 700.00 |
| Arm Reach (Inch) | 62 |
| Maximum Tapping Capacity in Mild Steel (Inch) | 3/8 |
| Maximum Tapping Capacity in Aluminum (Inch) | 1/2 |
| Tooling Style | WES1 |
| Power Type | Pneumatic |
$3,898.10
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Enco - 254mm Swing, Step Pulley Drill Press - 5 Speed, 1/2 hp, Single Phase
Item #: 32752446
Brand: Enco
Exact Tooling IR#: 04
Features and Benefits
Bench drill presses, also known as bench top, are stationary presses that are mounted to a workbench. They are used for precision applications, on smaller workpieces and where limited space is a concern.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Step pulleys are driven by a belt system that is manually changed to achieve a range of fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors.
| Product Specifications | |
|---|---|
| Stand Type | Bench |
| Machine Type | Drill Press |
| Swing Distance (mm) | 254.00 |
| Swing Distance (Decimal Inch) | 10.0000 |
| Spindle Speed Control | Step Pulley |
| Phase | 1 |
| Spindle Taper Size | 33JT |
| Spindle Travel Length (mm) | 60.00 |
| Spindle Travel Length (Decimal Inch) | 2.3622 |
| Horsepower (HP) | 0.5 |
| Voltage | 115 |
| Minimum Spindle Speed (RPM) | 620 |
| Maximum Spindle Speed (RPM) | 2600 |
| Drilling Capacity in Steel (mm) | 13.00 |
| Drilling Capacity in Cast Iron (mm) | 15.00 |
| Maximum Chuck Capacity (mm) | 13.00 |
| Radial Head | NonRadial Head |
| Number of Spindle Speeds | 5 |
| Spindle to Table Distance (mm) | 325.00 |
| Spindle to Table Distance (Decimal Inch) | 12.7953 |
| Minimum Spindle to Column Distance (Inch) | 5 |
| Spindle to Column Distance (Inch) | 127 |
| Table Length (Decimal Inch) | 7.4803 |
| Table Length (mm) | 190.00 |
| Table Width/Diameter (mm) | 190.00 |
| Table Width/Diameter (Decimal Inch) | 7.4803 |
| Table Load Capacity (Lb.) | 15.00 |
| Table Slot Size (mm) | 12 |
| Table Slot Size (Decimal Inch) | 0.4724 |
| Table Tilt (Degrees) | 45.00 |
| Base Length (mm) | 340.00 |
| Base Length (Decimal Inch) | 13.3858 |
| Column Diameter (Decimal Inch) | 2.2835 |
| Column Diameter (mm) | 58.00 |
| Overall Length (mm) | 580.00 |
| Overall Length (Decimal Inch) | 22.8346 |
| Overall Height (mm) | 720 |
| Overall Height (Decimal Inch) | 28.43 |
| Overall Depth (Decimal Inch) | 12.9921 |
| Overall Depth (mm) | 330.00 |
$595.73
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Clausing - 29-1/2" Swing, Geared Head Radial Arm Drill Press - 6 Speed, 2 hp, Three Phase
Item #: 51712537
Brand: Clausing
Model #: CL720A
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Radial arm drill presses are designed for drilling and boring large holes in hard to reach areas as well as countersinking and grinding. The head of the radial drill can be moved, height adjusted and rotated. The spindle can withstand heavy duty operations.
Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Radial Arm Drill Press |
| Swing Distance (Decimal Inch) | 29.5000 |
| Spindle Speed Control | Geared Head |
| Phase | 3 |
| Spindle Taper Size | 4MT |
| Spindle Travel Length (Decimal Inch) | 8.6600 |
| Horsepower (HP) | 2 |
| Voltage | 230/460 |
| Minimum Spindle Speed (RPM) | 88 |
| Maximum Spindle Speed (RPM) | 1500 |
| Drilling Capacity in Steel (Inch) | 1-17/64 |
| Drilling Capacity in Cast Iron (Inch) | 2 |
| Tapping Capacity in Steel (Decimal Inch) | 1.0000 |
| Tapping Capacity in Cast Iron (Decimal Inch) | 1.2600 |
| Maximum Chuck Capacity (Decimal Inch) | 0.7500 |
| Radial Head | Radial Head |
| Number of Spindle Speeds | 6 |
| Power Downfeed Rate | 0.002 |
| Spindle to Table Distance (Decimal Inch) | 41.7000 |
| Minimum Spindle to Column Distance (Inch) | 8-21/32 |
| Spindle to Column Distance (mm) | 750.00 |
| Spindle to Column Distance (Decimal Inch) | 29.5000 |
| Table Length (Decimal Inch) | 35.5000 |
| Table Width/Diameter (Decimal Inch) | 25.3000 |
| Table Tilt (Degrees) | 45.00 |
| Base Length (Decimal Inch) | 49.6000 |
| Base Width (Decimal Inch) | 25.2000 |
| Base Depth (Decimal Inch) | 6.5000 |
| Column Diameter (Decimal Inch) | 8.2800 |
| Radial Arm Length (Inch) | 30 |
| Radial Arm Length (Feet) | 2.50 |
| Overall Length (Decimal Inch) | 66.1000 |
| Overall Height (Decimal Inch) | 85.00 |
| Overall Depth (Inch) | 32-1/2 |
| Includes | Box Table; Operations & Parts Manual; Tool Kit |
$18,433.67
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Clausing - 20" Swing, Step Pulley Drill Press - Variable Speed, 3/4 to 1-1/2 hp, Three Phase
Item #: 80631823
Brand: Clausing
Model #: 2277
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Step pulleys are driven by a belt system that is manually changed to achieve a range of fixed speeds.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill Press |
| Swing Distance (mm) | 508.00 |
| Swing Distance (Inch) | 20 |
| Spindle Speed Control | Step Pulley |
| Phase | 3 |
| Spindle Taper Size | 3MT |
| Spindle Travel Length (mm) | 165.10 |
| Spindle Travel Length (Inch) | 6-1/2 |
| Spindle Travel Length (Decimal Inch) | 6.5000 |
| Horsepower (HP) | 3/4 to 1-1/2 |
| Voltage | 440 |
| Minimum Spindle Speed (RPM) | 150 |
| Maximum Spindle Speed (RPM) | 2000 |
| Drilling Capacity in Steel (mm) | 19.05 |
| Drilling Capacity in Steel (Inch) | 3/4 |
| Drilling Capacity in Cast Iron (mm) | 25.40 |
| Drilling Capacity in Cast Iron (Inch) | 1 |
| Maximum Chuck Capacity (mm) | 31.75 |
| Maximum Chuck Capacity (Decimal Inch) | 1.2500 |
| Radial Head | NonRadial Head |
| Number of Spindle Speeds | variable |
| Spindle to Table Distance (mm) | 841.00 |
| Spindle to Table Distance (Decimal Inch) | 33.1103 |
| Spindle to Column Distance (Inch) | 10 |
| Table Length (Inch) | 19-1/2 |
| Table Length (Decimal Inch) | 19.5000 |
| Table Length (mm) | 495.30 |
| Table Width/Diameter (mm) | 558.80 |
| Table Width/Diameter (Inch) | 22 |
| Table Slot Size (mm) | 393.70 |
| Table Slot Size (Inch) | 1/2 |
| Table Slot Size (Decimal Inch) | 15.5000 |
| Table Tilt (Degrees) | 0.00 |
| Base Length (Inch) | 36 |
| Base Width (Inch) | 22 |
| Column Diameter (Inch) | 4 |
| Column Diameter (Decimal Inch) | 4.0000 |
| Column Diameter (mm) | 101.60 |
| Overall Length (mm) | 559.00 |
| Overall Length (Decimal Inch) | 22.0079 |
| Overall Height (mm) | 1752.60 |
| Overall Height (Inch) | 69 |
| Overall Depth (Decimal Inch) | 35.9843 |
| Overall Depth (mm) | 914.00 |
$6,631.06
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Viking Industries - 63 Inch Arm Reach, 700 RPM Speed, Pneumatic Power Tapping Arm - 1/2 Inch Tapping Capacity in Aluminum, 3/8 Inch Tapping Capacity in Mild Steel
Item #: 32949364
Brand: Viking Industries
Model #: VT700
Exact Tooling IR#: 04
| Product Specifications | |
|---|---|
| Speed (RPM) | 700.00 |
| Arm Reach (Inch) | 63 |
| Maximum Tapping Capacity in Mild Steel (Inch) | 3/8 |
| Maximum Tapping Capacity in Aluminum (Inch) | 1/2 |
| Tooling Style | WES1 |
| Power Type | Pneumatic |
$2,910.27
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Jet - 17" Swing, Step Pulley Drill Press - 12 Speed, 1 hp, Single Phase
Item #: 30423735
Brand: Jet
Model #: 354300
Exact Tooling IR#: 04
Features and Benefits
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses. They are most suited for heavy-duty operations.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Step pulleys are driven by a belt system that is manually changed to achieve a range of fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors.
| Product Specifications | |
|---|---|
| Stand Type | Floor |
| Machine Type | Drill Press |
| Swing Distance (Inch) | 17 |
| Spindle Speed Control | Step Pulley |
| Phase | 1 |
| Spindle Taper Size | 2MT |
| Spindle Travel Length (Inch) | 3-5/16 |
| Horsepower (HP) | 1 |
| Voltage | 115/230 |
| Minimum Spindle Speed (RPM) | 350 |
| Maximum Spindle Speed (RPM) | 2800 |
| Drilling Capacity in Steel (Inch) | 5/8 |
| Drilling Capacity in Cast Iron (Inch) | 3/4 |
| Number of Spindle Speeds | 12 |
| Spindle to Table Distance (Inch) | 30-1/2 |
| Table Length (Inch) | 14 |
| Table Width/Diameter (Inch) | 14 |
| Table Slot Size (Inch) | 1/2 |
| Base Length (Inch) | 16-15/16 |
| Base Width (Inch) | 10-13/16 |
| Column Diameter (Inch) | 3-1/8 |
$2,560.55
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Enco - 330mm Swing, Step Pulley Drill Press - 16 Speed, 3/4 hp, Single Phase
Item #: 32752461
Brand: Enco
Exact Tooling IR#: 04
Features and Benefits
Bench drill presses, also known as bench top, are stationary presses that are mounted to a workbench. They are used for precision applications, on smaller workpieces and where limited space is a concern.
Drill presses are used for several countersinking, counterboring, drilling, reaming and tapping operations.They are used for heavy-duty metalworking operations.
Step pulleys are driven by a belt system that is manually changed to achieve a range of fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors.
| Product Specifications | |
|---|---|
| Stand Type | Bench |
| Machine Type | Drill Press |
| Swing Distance (mm) | 330.00 |
| Swing Distance (Decimal Inch) | 12.9921 |
| Spindle Speed Control | Step Pulley |
| Phase | 1 |
| Spindle Taper Size | 2MT |
| Spindle Travel Length (mm) | 80.00 |
| Spindle Travel Length (Decimal Inch) | 3.1496 |
| Horsepower (HP) | 3/4 |
| Voltage | 115 |
| Minimum Spindle Speed (RPM) | 250 |
| Maximum Spindle Speed (RPM) | 3100 |
| Drilling Capacity in Steel (mm) | 16.00 |
| Drilling Capacity in Cast Iron (mm) | 18.00 |
| Maximum Chuck Capacity (mm) | 16.00 |
| Radial Head | NonRadial Head |
| Number of Spindle Speeds | 16 |
| Spindle to Table Distance (mm) | 450.00 |
| Spindle to Table Distance (Decimal Inch) | 17.7165 |
| Minimum Spindle to Column Distance (Inch) | 6.4961 |
| Spindle to Column Distance (Inch) | 165 |
| Table Length (Decimal Inch) | 11.4173 |
| Table Length (mm) | 290.00 |
| Table Width/Diameter (mm) | 290.00 |
| Table Width/Diameter (Decimal Inch) | 11.4173 |
| Table Load Capacity (Lb.) | 18.00 |
| Table Slot Size (mm) | 16 |
| Table Slot Size (Decimal Inch) | 0.6299 |
| Table Tilt (Degrees) | 45.00 |
| Base Length (mm) | 420.00 |
| Base Length (Decimal Inch) | 16.5354 |
| Column Diameter (Decimal Inch) | 2.7559 |
| Column Diameter (mm) | 70.00 |
| Overall Length (mm) | 580.00 |
| Overall Length (Decimal Inch) | 22.8346 |
| Overall Height (mm) | 980 |
| Overall Height (Decimal Inch) | 38.58 |
| Overall Depth (Decimal Inch) | 12.9921 |
| Overall Depth (mm) | 330.00 |
$860.66
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Floor Drill Press: 38-1/2″ Swing, 1.5 hp, 220V, 1 Phase 5 Speed, 21-5/8″ Table Length, 19-11/16″ Table Width
Item #: 00624072
Brand: Enco
Model #: UNKNOWN
Product Specifications
| Stand Type | Bench |
| Machine Type | Drill Press |
| Swing Distance (Inch) | 38-1/2 |
| Spindle Speed Control | Step Pulley |
| Phase | 1 |
| Spindle Taper Size | 3MT |
| Minimum Spindle Speed (RPM) | 340 |
| Maximum Spindle Speed (RPM) | 3000 |
| Number of Spindle Speeds | 5 |
| Number Of Spindle Speeds | 5 |
| Drilling Capacity in Steel (Inch) | 1-1/4 |
| Drilling Capacity in Cast Iron (Inch) | 1-1/2 |
| Table Slot Size (Fractional Inch) | 5/8 |
| Table Length (mm) | 550.00 |
| Table Length (Inch) | 21-5/8 |
| Table Width (Inch) | 19-11/16 |
| Voltage | 220 |
| Voltage | 220 V |
| Horsepower | 1.5 |
| Includes | Stand (MSC 00454496) |
$164.12
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It