Email: sales@alltoolandsupply.com | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

Machinery > Milling Machines (ET04) - (1996 Products)

Machinery > Milling Machines (ET04)

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - All Tool & Supply

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 60859287
Brand: Rong Fu
Model #: RF-45N2F
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 1
Table Length (Inch) 32
Table Width (Inch) 9-3/8
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1181
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (mm) 38.10
Drilling Capacity in Steel (Inch) 1-1/2
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Decimal Inch) 10.0394
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 30.00
Horsepower (HP) 1.00
Voltage 220

$7,112.63

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 3 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - All Tool & Supply

Rong Fu - 3 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 64162779
Brand: Rong Fu
Model #: RF-45/3
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. Three-phase lines provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 3
Table Length (Inch) 32
Table Width (Inch) 9-3/8
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1181
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (mm) 38.10
Drilling Capacity in Steel (Inch) 1-1/2
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Decimal Inch) 10.0394
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 30.00
Horsepower (HP) 1.00
Voltage 220

$6,018.05

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Combination - 31-3/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 2 hp, 230 Volts - All Tool & Supply

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Combination - 31-3/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 2 hp, 230 Volts


Item #: 35295203
Brand: Jet
Model #: 350135
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Step Pulley
Swing Distance (Inch) 15-7/8
Phase 1
Table Length (Inch) 31-3/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Minimum Spindle Speed (RPM) 150.00
Maximum Spindle Speed (RPM) 3000.00
Machine Type Mill Drill Combination
Power Down Feed No
Spindle Taper Size R8
Voltage Tolerance 230
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 26
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Horsepower (HP) 2
Voltage 230
Overall Length (Decimal Inch) 47.0000
Overall Height (Inch) 40
Overall Depth (Inch) 51
Includes Mill Drill; Newall DP500 DRO

$6,285.51

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Combination - 31-3/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 2 hp, 230 Volts - All Tool & Supply

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Combination - 31-3/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 2 hp, 230 Volts


Item #: 35295211
Brand: Jet
Model #: 350136
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Step Pulley
Swing Distance (Inch) 15-7/8
Phase 1
Table Length (Inch) 31-3/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Minimum Spindle Speed (RPM) 150.00
Maximum Spindle Speed (RPM) 3000.00
Machine Type Mill Drill Combination
Power Down Feed Yes
Spindle Taper Size R8
Voltage Tolerance 230
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 26
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Horsepower (HP) 2
Voltage 230
Overall Length (Decimal Inch) 47.0000
Overall Height (Inch) 40
Overall Depth (Inch) 51
Includes Mill Drill; Newall DP500 DRO; X-Axis Powerfeed

$7,384.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts - All Tool & Supply

Jet - 1 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts


Item #: 39937222
Brand: Jet
Model #: 351153
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 19-11/16
Phase 1
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (mm) 130.00
Spindle Travel Length (Inch) 5
Spindle Travel Length (Decimal Inch) 5.0000
Machine Type Mill Drill Combination
Power Down Feed Yes
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 115/230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 18-1/8
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 115/230
Overall Length (Inch) 29
Overall Height (Inch) 50
Overall Depth (Inch) 36
Includes Spindle Guard; Work Lamp; Power Down Feed; Newall DP700 2-Axis DRO; X-Axis Powerfeed

$11,245.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Combination - 31-3/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 2 hp, 115/230 Volts - All Tool & Supply

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Combination - 31-3/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 2 hp, 115/230 Volts


Item #: 35295245
Brand: Jet
Model #: 350133
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Step Pulley
Swing Distance (Inch) 15-7/8
Phase 1
Table Length (Inch) 31-3/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Minimum Spindle Speed (RPM) 150.00
Maximum Spindle Speed (RPM) 3000.00
Machine Type Mill Drill Combination
Power Down Feed No
Spindle Taper Size R8
Voltage Tolerance 115/230
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 18
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Horsepower (HP) 2
Voltage 115/230
Overall Length (Decimal Inch) 47.0000
Overall Height (Inch) 40
Overall Depth (Inch) 51
Includes Mill Drill; Newall DP500 DRO

$5,404.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 1 Phase, Step Pulley Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 7-1/2" Cross Travel, 12 Spindle Speeds, 1.5 hp, 110/220 Volts - All Tool & Supply

Rong Fu - 1 Phase, Step Pulley Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 7-1/2" Cross Travel, 12 Spindle Speeds, 1.5 hp, 110/220 Volts


Item #: 00685420
Brand: Rong Fu
Model #: RF-31/1
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Step Pulley
Phase 1
Table Length (Inch) 28-3/4
Table Width (Inch) 8-1/4
Longitudinal Travel (Inch) 18-1/8
Cross Travel (Inch) 7-1/2
Number of Spindle Speeds 12
Minimum Spindle Speed (RPM) 125.00
Maximum Spindle Speed (RPM) 3000.00
Spindle Travel Length (mm) 127.00
Spindle Travel Length (Inch) 5
Spindle Taper Size R8
Drilling Capacity in Steel (mm) 31.75
Drilling Capacity in Steel (Inch) 1-1/4
Drilling Capacity in Cast Iron (mm) 31.75
Drilling Capacity in Cast Iron (Inch) 1-1/4
Tapping Capacity in Steel (mm) 15.88
Tapping Capacity in Steel (Inch) 5/8
Quill Diameter (Decimal Inch) 4.5276
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Decimal Inch) 8.0709
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Head Swivel (Degrees) 360.00
Horsepower (HP) 1.50
Voltage 110/220

$4,776.73

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - All Tool & Supply

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 09542911
Brand: Rong Fu
Model #: RF-40/1 M
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 1
Table Length (Inch) 28-3/4
Table Width (Inch) 8-1/4
Longitudinal Travel (Inch) 18-1/8
Cross Travel (Inch) 9
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 50.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1181
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (mm) 38.10
Drilling Capacity in Steel (Inch) 1-1/2
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Quill Diameter (Decimal Inch) 4.5276
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Decimal Inch) 10.2362
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 90.00
Horsepower (HP) 1.00
Voltage 220

$5,292.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 20-1/2" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts - All Tool & Supply

Jet - 1 Phase, 20-1/2" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts


Item #: 54654355
Brand: Jet
Model #: 351147
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20-1/2
Phase 1
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (mm) 130.00
Spindle Travel Length (Inch) 5
Spindle Travel Length (Decimal Inch) 5.0000
Machine Type Mill Drill Combination
Power Down Feed Yes
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 115/230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 15-3/4
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 115/230
Overall Length (Inch) 28
Overall Height (Inch) 42-1/2
Overall Depth (Inch) 39-1/4
Includes Spindle Guard; Work Lamp; Power Down Feed; Newall DP500 DRO; X-Axis Powerfeed

$9,728.68

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 3 Phase, 16-3/8" Swing, Step Pulley Mill Drill Machine - 28-1/2" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 6-1/4" Cross Travel, 23 Spindle Speeds, 1 hp, 230 Volts - All Tool & Supply

Rong Fu - 3 Phase, 16-3/8" Swing, Step Pulley Mill Drill Machine - 28-1/2" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 6-1/4" Cross Travel, 23 Spindle Speeds, 1 hp, 230 Volts


Item #: 01241546
Brand: Rong Fu
Model #: ***BDS ITEM***
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. Three-phase lines provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Step Pulley
Swing Distance (Inch) 16-3/8
Phase 3
Table Length (Inch) 28-1/2
Table Width (Inch) 8-1/4
Longitudinal Travel (Inch) 18-1/8
Cross Travel (Inch) 6-1/4
Number of Spindle Speeds 23
Minimum Spindle Speed (RPM) 120.00
Maximum Spindle Speed (RPM) 2240.00
Spindle Taper Size R8
Horsepower (HP) 1.00
Voltage 230
Includes Stank (MSC 09519919)

$3,675.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts - All Tool & Supply

Jet - 1 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts


Item #: 54659578
Brand: Jet
Model #: 351152
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 19-11/16
Phase 1
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (mm) 130.00
Spindle Travel Length (Inch) 5
Spindle Travel Length (Decimal Inch) 5.0000
Machine Type Mill Drill Combination
Power Down Feed Yes
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 115/230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 18-1/8
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 115/230
Overall Length (Inch) 29
Overall Height (Inch) 50
Overall Depth (Inch) 36
Includes Spindle Guard; Work Lamp; Power Down Feed; Newall DP700 2-Axis DRO

$9,592.11

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Combination - 31-3/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 2 hp, 115/230 Volts - All Tool & Supply

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Combination - 31-3/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 2 hp, 115/230 Volts


Item #: 35295229
Brand: Jet
Model #: 350134
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Step Pulley
Swing Distance (Inch) 15-7/8
Phase 1
Table Length (Inch) 31-3/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Minimum Spindle Speed (RPM) 150.00
Maximum Spindle Speed (RPM) 3000.00
Machine Type Mill Drill Combination
Power Down Feed Yes
Spindle Taper Size R8
Voltage Tolerance 115/230
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 18
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Horsepower (HP) 2
Voltage 115/230
Overall Length (Decimal Inch) 47.0000
Overall Height (Inch) 40
Overall Depth (Inch) 51
Includes Mill Drill; Newall DP500 DRO; X-Axis Powerfeed

$6,953.22

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 3 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, Variable Spindle Speeds, 1.5 hp, 230 Volts - All Tool & Supply

Jet - 3 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, Variable Spindle Speeds, 1.5 hp, 230 Volts


Item #: 54649686
Brand: Jet
Model #: 351156
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. Three-phase lines provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 19-11/16
Phase 3
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds Variable
Minimum Spindle Speed (RPM) 50.00
Maximum Spindle Speed (RPM) 2500.00
Spindle Travel Length (mm) 107.00
Spindle Travel Length (Inch) 4-1/4
Spindle Travel Length (Decimal Inch) 4.2500
Machine Type Mill Drill Combination
Power Down Feed Yes
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (Inch) 3/4
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 18-1/8
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 230
Overall Length (Inch) 29
Overall Height (Inch) 50
Overall Depth (Inch) 36
Includes Spindle Guard; Work Lamp; Power Down Feed; Newall DP700 2-Axis DRO

$11,027.61

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 20-1/2" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts - All Tool & Supply

Jet - 1 Phase, 20-1/2" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts


Item #: 54657085
Brand: Jet
Model #: 351140
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20-1/2
Phase 1
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (mm) 130.00
Spindle Travel Length (Inch) 5
Spindle Travel Length (Decimal Inch) 5.0000
Machine Type Mill Drill Combination
Power Down Feed No
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 115/230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 15-3/4
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 115/230
Overall Length (Inch) 28
Overall Height (Inch) 42-1/2
Overall Depth (Inch) 39-1/4
Includes Spindle Guard; Work Lamp; Newall DP700 2-Axis DRO

$8,460.49

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Combination - 9-1/2" Table Length x 32-1/4" Table Width, 20-1/2" Longitudinal Travel, 7" Cross Travel, 12 Spindle Speeds, 2 hp, 115/230 Volts - All Tool & Supply

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Combination - 9-1/2" Table Length x 32-1/4" Table Width, 20-1/2" Longitudinal Travel, 7" Cross Travel, 12 Spindle Speeds, 2 hp, 115/230 Volts


Item #: 57462830
Brand: Jet
Model #: 350126
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Step Pulley
Swing Distance (Inch) 15-7/8
Phase 1
Table Length (Inch) 9-1/2
Table Width (Inch) 32-1/4
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 7
Number of Spindle Speeds 12
Minimum Spindle Speed (RPM) 110.00
Maximum Spindle Speed (RPM) 2580.00
Spindle Travel Length (Inch) 5
Spindle Travel Length (Decimal Inch) 5.0000
Machine Type Mill Drill Combination
Spindle Diameter (Inch) 1.8120
Spindle Taper Size R8
Drilling Capacity in Cast Iron (Inch) 1-1/4
Quill Diameter (Inch) 3
Horsepower (HP) 2
Voltage 115/230

$5,770.71

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts - All Tool & Supply

Jet - 1 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts


Item #: 54651146
Brand: Jet
Model #: 351158
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 19-11/16
Phase 1
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (mm) 130.00
Spindle Travel Length (Inch) 5
Spindle Travel Length (Decimal Inch) 5.0000
Machine Type Mill Drill Combination
Power Down Feed No
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 115/230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 18-1/8
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 115/230
Overall Length (Inch) 29
Overall Height (Inch) 50
Overall Depth (Inch) 36
Includes Spindle Guard; Work Lamp; Newall DP500 DRO

$8,938.66

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 20-1/2" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts - All Tool & Supply

Jet - 1 Phase, 20-1/2" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts


Item #: 54657077
Brand: Jet
Model #: 351041
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20-1/2
Phase 1
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (mm) 130.00
Spindle Travel Length (Inch) 5
Spindle Travel Length (Decimal Inch) 5.0000
Machine Type Mill Drill Combination
Power Down Feed Yes
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 115/230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 15-3/4
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 115/230
Overall Length (Inch) 28
Overall Height (Inch) 42-1/2
Overall Depth (Inch) 39-1/4
Includes Spindle Guard; Work Lamp; Power Down Feed

$6,059.25

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts - All Tool & Supply

Jet - 1 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts


Item #: 54675749
Brand: Jet
Model #: 351045
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 19-11/16
Phase 1
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (mm) 130.00
Spindle Travel Length (Inch) 5
Spindle Travel Length (Decimal Inch) 5.0000
Machine Type Mill Drill Combination
Power Down Feed No
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 115/230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 18-1/8
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 115/230
Overall Length (Inch) 29
Overall Height (Inch) 50
Overall Depth (Inch) 36
Includes Spindle Guard; Work Lamp

$6,622.11

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Combination - 9-1/2" Table Length x 32-1/4" Table Width, 14" Longitudinal Travel, 6" Cross Travel, 12 Spindle Speeds, 2 hp, 115/230 Volts - All Tool & Supply

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Combination - 9-1/2" Table Length x 32-1/4" Table Width, 14" Longitudinal Travel, 6" Cross Travel, 12 Spindle Speeds, 2 hp, 115/230 Volts


Item #: 44908416
Brand: Jet
Model #: 350125
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Step Pulley
Swing Distance (Inch) 15-7/8
Phase 1
Table Length (Inch) 9-1/2
Table Width (Inch) 32-1/4
Longitudinal Travel (Inch) 14
Cross Travel (Inch) 6
Number of Spindle Speeds 12
Minimum Spindle Speed (RPM) 110.00
Maximum Spindle Speed (RPM) 2580.00
Spindle Travel Length (Inch) 5
Spindle Travel Length (Decimal Inch) 5.0000
Machine Type Mill Drill Combination
Spindle Diameter (Inch) 1.8120
Spindle Taper Size R8
Drilling Capacity in Cast Iron (Inch) 1-1/4
Quill Diameter (Inch) 3
Horsepower (HP) 2
Voltage 115/230

$5,087.61

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts - All Tool & Supply

Jet - 1 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts


Item #: 54675327
Brand: Jet
Model #: 351159
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 19-11/16
Phase 1
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (mm) 130.00
Spindle Travel Length (Inch) 5
Spindle Travel Length (Decimal Inch) 5.0000
Machine Type Mill Drill Combination
Power Down Feed No
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 115/230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 18-1/8
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 115/230
Overall Length (Inch) 29
Overall Height (Inch) 50
Overall Depth (Inch) 36
Includes Spindle Guard; Work Lamp; Newall DP500 DRO; X-Axis Powerfeed

$9,849.51

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It