Steiner - 6 Ft. Wide x 6 Ft. High x 1 Inch Thick, 14 mil Thick Transparent Vinyl Portable Welding Screen Kit - Orange

Item #: 93215960
Brand: Steiner
Model #: 538HD-6X6
Exact Tooling IR#: 04

Product Specifications
Type	Portable Screen
Material	Transparent Vinyl
Width (Feet)	6.00
Height (Feet)	6.00
Thickness (Inch)	1
Thickness (mil)	14.00
Color	Orange

$130.50

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - Black Solid Color Anti-Slip Vinyl Tape - 4" Wide x 60' Long x 0.033" Thick, Heavy/High Traffic

Item #: 57788630
Brand: Made in USA
Exact Tooling IR#: 04

Product Specifications
Type	Tape
Surface Type	Anti-Slip
Special Color Properties	No Special Color Properties
Color	Black
Pattern	Solid Color
Traffic Type	Heavy/High Traffic
Tape Material	Vinyl
Width (Inch)	4
Length (Feet)	60
Thickness (Decimal Inch)	0.033

$134.74

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Federal Signal Corp - 120 Volt Electronic Horn - 0.18 Amps, 110 Decibles at 10', Vibrating, Waterproof

Item #: 54028006
Brand: Federal Signal Corp
Model #: 350-120-30
Exact Tooling IR#: 04

Product Specifications
Type	Electronic Horn
Explosion Proof	No
Vibrating	Yes
Weatherproof	Yes
Decibels @ Ten Feet (dB)	110.00
Voltage	120
Width (Decimal Inch)	4.0000
Height (Decimal Inch)	4.0000
Depth (Decimal Inch)	2.5000
Amperage Rating	0.18

$138.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Steiner - Size L, Green, Concealed Snaps, Arc Flash Coverall - 48 to 50" Chest, Cotton, 7 Pockets, Mandarin Collar, Concealed Snap Closures

Item #: 48291157
Brand: Steiner
Model #: 1035AF-L
Exact Tooling IR#: 04

Product Specifications
Garment Style	Coverall
Garment Type	Arc Flash
Size	Large
Color	Green
Material	Cotton
Hazardous Protection Level	HRC
Chest Size (Inch)	48-50
Cuff Style	Snaps at wrists
Ankle Style	Snap leg closure
Seam Style	Sewn
Closure Type	Concealed Snaps
Number of Pockets	7.000
Features	Mandarin collar; Concealed snap closures

$130.50

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 36 Inch Long x 3 Inch Wide x 3/16 Inch Thick,AISI/SAE Type 4142, Alloy Steel Pre Hardened Flat Stock - +0.25 Inch Long Tolerance, +0.005 Inch Wide Tolerance, +0.001 Inch Thickness Tolerance, 0.003 Inch Square Tolerance

Item #: 81175606
Brand: Value Collection
Exact Tooling IR#: 04

Product Specifications
Thickness (Inch)	3/16
Width (Inch)	3
Length (Inch)	36
Material Specification	AISI/SAE Type 4142
Thickness Tolerance (Decimal Inch)	+ .001
Width Tolerance (Decimal Inch)	+ .005 - .000
Length Tolerance (Decimal Inch)	+ .250 - .000
Square Tolerance (Decimal Inch)	0.0030

$189.32

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 1/4 Inch Thick x 3-1/2 Inch Wide x 36 Inch Long, 304 Stainless Steel Rectangular Rod

Item #: 75335638
Brand: Value Collection
Exact Tooling IR#: 04

Product Specifications

1/4 Inch Thick x 3-1/2 Inch Wide x 36 Inch Long, 304 Stainless Steel Rectangular Rod -

Stainless Steel Type 304

Thickness (Inch) 1/4

Width (Inch) 3-1/2

Length (Inch) 36

$125.90

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 0.032 Inch Thick x 48 Inch Wide x 48 Inch Long, Aluminum Sheet - Alloy 3003-H14

Item #: 09426164
Brand: Value Collection
Exact Tooling IR#: 04

Product Specifications
Material	Aluminum
Thickness (Decimal Inch)	0.0320
Width (Inch)	48
Length (Inch)	48
Alloy Type	3003-H14

$125.91

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

TriStar - 2' Long, 3/8" Diam, Plastic Plastic Rod - + 1/4 - 0.0" Length Tolerance, +0.015/-0.000" Diam Tolerance, 60D Hardness, Dull Gold

Item #: 33369737
Brand: TriStar
Model #: RULJRX.375X24
Exact Tooling IR#: 04

Product Specifications
Material	Plastic
Diameter (Inch)	3/8
Length (Inch)	24
Length Tolerance (Decimal Inch)	+ .250 - .000
Diameter Tolerance (Decimal Inch)	+0.015/-0.000
Hardness	60D
Color	Dull Gold

$138.53

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Dynabrade - 18" Long x 1/2" Wide Power Sander Contact Arm - 5/16" Diam, For Use with 40320

Item #: 01328863
Brand: Dynabrade
Model #: 11301
Exact Tooling IR#: 04

Product Specifications
Accessory Type	Contact Arm
For Use With	40320
Length (Inch)	18
Width (Inch)	1/2
Diameter (Inch)	5/16
PSC Code	3405

$137.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

GoatThroat Pumps - Hand Flow Regulator - For Use with Acetone and Mek

Item #: 36302529
Brand: GoatThroat Pumps
Model #: RT-200S
Exact Tooling IR#: 04

Product Specifications
Type	Hand Flow Regulator
For Use With	Acetone; GT200S Pump

$132.17

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rothenberger - Pipe & Tube Cutters Type: Pipe Cutter Maximum Pipe Capacity (Inch): 1-5/8

Item #: 11193729
Brand: Rothenberger
Model #: 1000001748
Exact Tooling IR#: 04

Product Specifications

Pipe & Tube Cutters; Type: Pipe Cutter ; Maximum Pipe Capacity (Inch): 1-5/8 ; Maximum Pipe Capacity (mm): 42 ; Minimum Pipe Capacity: 3/8 (Inch); Cuts Material Type: Corrugated INOX

Type Pipe Cutter

Maximum Pipe Capacity (Inch) 1-5/8

Maximum Pipe Capacity (mm) 42

Minimum Pipe Capacity (Inch) 3/8

Cuts Material Type Corrugated INOX

$134.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

THK - Table Top Actuator Accessories Type.: Top Table

Item #: 05878079
Brand: THK
Model #: KR TBL46-A
Exact Tooling IR#: 04

Product Specifications

Table Top Actuator Accessories; Type.: Top Table

Type. Top Table

$125.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Power Drive - 18 Tooth, 5/8" Inside x 2.811" Outside Diam, Timing Belt Pulley - 3/4, 1" Belt Width, 2.865" Pitch Diam, Steel & Cast Iron

Item #: 35376524
Brand: Power Drive
Model #: 18H100-6FS7
Exact Tooling IR#: 04

Product Specifications
Number of Teeth	18
Inside Diameter (Inch)	5/8
Outside Diameter (Decimal Inch)	2.8110
Fractional Belt Width	3/4, 1
Pitch Diameter (Decimal Inch)	2.8650
Material	Steel, Cast Iron

$125.87

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SKF - 30mm Bore Diam, 72mm Outside Diam, 19mm Wide Cylindrical Roller Bearing - 51,200 N Dynamic Capacity, 48,000 Lbs. Static Capacity

Item #: 43340991
Brand: SKF
Model #: NJ 306 ECP/C4
Exact Tooling IR#: 04

Product Specifications
Type.	Cylindrical
Bore Diameter (mm)	30.000
Static Load Capacity	48000
Dynamic Load Capacity (N)	51200
Outside Diameter (mm)	72.0000
Width (mm)	19.00

$133.48

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SKF - 30mm Bore Diam, 72mm Outside Diam, 19mm Wide Cylindrical Roller Bearing - 51,200 N Dynamic Capacity, 48,000 Lbs. Static Capacity

Item #: 43340967
Brand: SKF
Model #: NJ 306 ECJ/C3
Exact Tooling IR#: 04

Product Specifications
Type.	Cylindrical
Bore Diameter (mm)	30.000
Static Load Capacity	48000
Dynamic Load Capacity (N)	51200
Outside Diameter (mm)	72.0000
Width (mm)	19.00

$133.48

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SKF - 30mm Bore Diam, 72mm Outside Diam, 19mm Wide Cylindrical Roller Bearing - 51,200 N Dynamic Capacity, 48,000 Lbs. Static Capacity

Item #: 43340975
Brand: SKF
Model #: NJ 306 ECP
Exact Tooling IR#: 04

Product Specifications
Type.	Cylindrical
Bore Diameter (mm)	30.000
Static Load Capacity	48000
Dynamic Load Capacity (N)	51200
Outside Diameter (mm)	72.0000
Width (mm)	19.00

$133.48

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 3/8", 1-1/2" LOC, 3/8" Shank Diam, 4" OAL, 5 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 45° Helix, Centercutting, Right Hand Cut, Right Hand Flute

Item #: 56209919
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.

Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.

Product Specifications
Mill Diameter (Inch)	3/8
Mill Diameter (Decimal Inch)	0.3750
Number of Flutes	5
Length of Cut (Inch)	1-1/2
Length of Cut (Decimal Inch)	1.5000
Material	Solid Carbide
Finish/Coating	Uncoated
Shank Diameter (Inch)	3/8
Single or Double End	Single
Overall Length (Inch)	4
Center Cutting	Center Cutting
Flute Direction	Right Hand
Cutting Direction	Right Hand
Helix Angle	45.00
Flute Type	Spiral
Length Type	Long
Helix Style	Medium
Mill Diameter Tolerance (Decimal Inch)	+0.000/-0.002
Material Grade	Micrograin
Chipbreaker	No
Extended Reach	No
Shank Diameter Tolerance (Decimal Inch)	-0.0001/-0.0004

Product Specifications

Mill Diameter (Inch) 3/8

Mill Diameter (Decimal Inch) 0.3750

Number of Flutes 5

Length of Cut (Inch) 1-1/2

Length of Cut (Decimal Inch) 1.5000

Material Solid Carbide

Finish/Coating Uncoated

Shank Diameter (Inch) 3/8

Single or Double End Single

Overall Length (Inch) 4

Center Cutting Center Cutting

Flute Direction Right Hand

Cutting Direction Right Hand

Helix Angle 45.00

Flute Type Spiral

Length Type Long

Helix Style Medium

Mill Diameter Tolerance (Decimal Inch) +0.000/-0.002

Material Grade Micrograin

Chipbreaker No

Extended Reach No

Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004

$68.56

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Controx - 3.18mm Cutting Diam x 2-1/8" Length of Cut, 4 Flute, Upcut Spiral Router Bit - Proprietary Coated, Right Hand Cut, Solid Carbide, 3" OAL x 1/8" Shank Diam, Ball Nose

Item #: 58269416
Brand: Controx
Model #: 73650030532330
Exact Tooling IR#: 04

Features and Benefits

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Proprietary coatings are specially designed by the manufacturer.

Product Specifications
Cutting Diameter (mm)	3.18
Cutting Diameter (Decimal Inch)	0.1250
Number of Flutes	4
Flute Type	Upcut
Cutting Direction	Right Hand
Material Application	Kevlar; Composite; Honeycomb Core
Material	Solid Carbide
Length of Cut (mm)	53.98
Length of Cut (Decimal Inch)	2.1250
Length of Cut (Inch)	2-1/8
Shank Diameter (mm)	3.18
Shank Diameter (Inch)	1/8
Shank Diameter (Decimal Inch)	0.1250
Overall Length (mm)	76.20
Overall Length (Inch)	3
Router Style	Ball Nose
Finish/Coating	Proprietary

Product Specifications

Cutting Diameter (mm) 3.18

Cutting Diameter (Decimal Inch) 0.1250

Number of Flutes 4

Flute Type Upcut

Cutting Direction Right Hand

Material Application Kevlar; Composite; Honeycomb Core

Material Solid Carbide

Length of Cut (mm) 53.98

Length of Cut (Decimal Inch) 2.1250

Length of Cut (Inch) 2-1/8

Shank Diameter (mm) 3.18

Shank Diameter (Inch) 1/8

Shank Diameter (Decimal Inch) 0.1250

Overall Length (mm) 76.20

Overall Length (Inch) 3

Router Style Ball Nose

Finish/Coating Proprietary

$138.01

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 1/2", 2-1/4" LOC, 1/2" Shank Diam, 6" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 37° Helix, Centercutting, Right Hand Cut, Right Hand Flute

Item #: 43027333
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.

Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.

Product Specifications
Mill Diameter (Inch)	1/2
Mill Diameter (Decimal Inch)	0.5000
Number of Flutes	3
Length of Cut (Inch)	2-1/4
Length of Cut (Decimal Inch)	2.2500
Material	Solid Carbide
Finish/Coating	Uncoated
Shank Diameter (Inch)	1/2
Single or Double End	Single
Overall Length (Inch)	6
Center Cutting	Center Cutting
Flute Direction	Right Hand
Cutting Direction	Right Hand
Helix Angle	37.00
Flute Type	Spiral
Mill Diameter Tolerance (Decimal Inch)	+0.000/-0.005
Material Grade	Micrograin
Chipbreaker	No
Extended Reach	No
Shank Diameter Tolerance (Decimal Inch)	+0.0001/-0.0004

Product Specifications

Mill Diameter (Inch) 1/2

Mill Diameter (Decimal Inch) 0.5000

Number of Flutes 3

Length of Cut (Inch) 2-1/4

Length of Cut (Decimal Inch) 2.2500

Material Solid Carbide

Finish/Coating Uncoated

Shank Diameter (Inch) 1/2

Single or Double End Single

Overall Length (Inch) 6

Center Cutting Center Cutting

Flute Direction Right Hand

Cutting Direction Right Hand

Helix Angle 37.00

Flute Type Spiral

Mill Diameter Tolerance (Decimal Inch) +0.000/-0.005

Material Grade Micrograin

Chipbreaker No

Extended Reach No

Shank Diameter Tolerance (Decimal Inch) +0.0001/-0.0004

$114.58

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 7/8" Diam, Coarse Pitch, 3-1/2" LOC, 5 Flute Powdered Metal Corner Chamfer Roughing End Mill - Uncoated, 5-3/4" OAL, 7/8" Shank Diam, Single End, Centercutting, 30° Helix

Item #: 75633412
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Powdered Metal (PM) is tougher and more cost effective than solid carbide. It is commonly used on highly abrasive materials including high silicon aluminums.

Uncoated tools do not feature supportive treatments on the cutting edge. They are used at reduced speeds for general applications on nonferrous metals.

Product Specifications
Mill Diameter (Inch)	7/8
Mill Diameter (Decimal Inch)	0.8750
Number of Flutes	5
Pitch	Coarse
Length of Cut (Inch)	3-1/2
Length of Cut (Decimal Inch)	3.5000
Shank Diameter (Inch)	7/8
End Type	Corner Chamfer
Material	Powdered Metal
Finish/Coating	Uncoated
Overall Length (Inch)	5-3/4
Centercutting	Center Cutting
Helix Angle	30.00
Extended Reach	No
Material Grade	ASP-52
Single or Double End	Single
Cutting Direction	Right Hand
Flute Direction	Right Hand

Product Specifications

Mill Diameter (Inch) 7/8

Mill Diameter (Decimal Inch) 0.8750

Number of Flutes 5

Pitch Coarse

Length of Cut (Inch) 3-1/2

Length of Cut (Decimal Inch) 3.5000

Shank Diameter (Inch) 7/8

End Type Corner Chamfer

Material Powdered Metal

Finish/Coating Uncoated

Overall Length (Inch) 5-3/4

Centercutting Center Cutting

Helix Angle 30.00

Extended Reach No

Material Grade ASP-52

Single or Double End Single

Cutting Direction Right Hand

Flute Direction Right Hand

$130.92

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Stainless Steel Type	304
Thickness (Inch)	1/4
Width (Inch)	3-1/2
Length (Inch)	36

Type	Pipe Cutter
Maximum Pipe Capacity (Inch)	1-5/8
Maximum Pipe Capacity (mm)	42
Minimum Pipe Capacity (Inch)	3/8
Cuts Material Type	Corrugated INOX