Climax Metal Products - 1" Inside x 1-3/4" Outside Diam, Two Piece Rigid Coupling without Keyway - 3" Long

Item #: 75242008
Brand: Climax Metal Products
Model #: 2ISCC-100-100-S
Exact Tooling IR#: 04

Product Specifications
Type	Two Piece Coupling without Keyway
Inside Diameter (Inch)	1
Reduced Inside Diameter (Decimal Inch)	1.000
Outside Diameter (Inch)	1-3/4
Length (Inch)	3
Material	Stainless Steel
PSC Code	5340

$147.74

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Browning - 1-3/16" ID, 6-3/16" OAL x 3-9/32" OAH Pillow Block Air Handling - 2,567 Lb Static Cap, 4,381 Lb Dyn Cap, 4-23/32" Btw Mnt Hole Ctrs, 1-11/16" Base-to-Ctr Ht, Cast Iron

Item #: 80463540
Brand: Browning
Model #: VPS-219 AH
Exact Tooling IR#: 04

Product Specifications
Type	Pillow Block Air Handling
Inside Diameter (Inch)	1-3/16
Width (Inch)	1-3/4
Overall Length (Inch)	6-3/16
Overall Height (Inch)	3-9/32
Static Load Capacity (Pounds)	2567.00
Dynamic Load Capacity (Pounds)	4381
Distance Between Mounting Hole Centers (Decimal Inch)	4.6250
Distance Between Mounting Hole Centers (Inch)	4-23/32
Material	Cast Iron
Distance Between Base And Center (Decimal Inch)	1.6880
Distance Between Base And Center (Inch)	1-11/16
Insert Material	52100 Steel
Lock Type	Set Screw
Bolt Size (Inch)	1/2

$128.42

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Browning - 1-3/16" ID, 6-3/16" OAL x 3-9/32" OAH Pillow Block - 2,567 Lb Static Cap, 4,381 Lb Dyn Cap, 4-5/8" Btw Mnt Hole Ctrs, 1-11/16" Base-to-Ctr Ht, Cast Iron

Item #: 82732793
Brand: Browning
Model #: VPS-219
Exact Tooling IR#: 04

Product Specifications
Type	Pillow Block
Inside Diameter (Inch)	1-3/16
Width (Inch)	1-3/4
Overall Length (Inch)	6-3/16
Overall Height (Inch)	3-9/32
Static Load Capacity (Pounds)	2567.00
Dynamic Load Capacity (Pounds)	4381
Distance Between Mounting Hole Centers (Decimal Inch)	4.6250
Distance Between Mounting Hole Centers (Inch)	4-5/8
Material	Cast Iron
Distance Between Base And Center (Decimal Inch)	1.6880
Distance Between Base And Center (Inch)	1-11/16
Insert Material	52100 Steel
Lock Type	Set Screw
Bolt Size (Inch)	1/2

$128.42

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 12mm, 36mm LOC, 12mm Shank Diam, 93mm OAL, 5 Flute, Solid Carbide Square End Mill - Single End, FIREX Finish, Spiral Flute, 45° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 3897

Item #: 58545351
Brand: Guhring
Model #: 9038970120000
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

FIREX is a multi-layer coating that combines the characteristics of universal applicability of TiN, the heat resistance of TiAlN and the shock resistance of TiCN. FIREX is a proprietary coating exclusive to Guhring, Inc.

Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.

Product Specifications
Mill Diameter (mm)	12.00
Mill Diameter (Decimal Inch)	0.4724
Number of Flutes	5
Length of Cut (mm)	36.00
Length of Cut (Decimal Inch)	1.4173
Material	Solid Carbide
Finish/Coating	FIREX
Shank Diameter (mm)	12.00
Single or Double End	Single
Overall Length (mm)	93.00
Center Cutting	Center Cutting
Flute Direction	Right Hand
Cutting Direction	Right Hand
Helix Angle	45.00
Flute Type	Spiral
Length Type	Long
Material Grade	Ultra Fine Grain
Reach Length (mm)	48.00
Chipbreaker	No
Extended Reach	Yes
Series/List	3897

Product Specifications

Mill Diameter (mm) 12.00

Mill Diameter (Decimal Inch) 0.4724

Number of Flutes 5

Length of Cut (mm) 36.00

Length of Cut (Decimal Inch) 1.4173

Material Solid Carbide

Finish/Coating FIREX

Shank Diameter (mm) 12.00

Single or Double End Single

Overall Length (mm) 93.00

Center Cutting Center Cutting

Flute Direction Right Hand

Cutting Direction Right Hand

Helix Angle 45.00

Flute Type Spiral

Length Type Long

Material Grade Ultra Fine Grain

Reach Length (mm) 48.00

Chipbreaker No

Extended Reach Yes

Series/List 3897

$128.42

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 3/4", 1-5/8" LOC, 3/4" Shank Diam, 3-7/8" OAL, 3 Flute, Powdered Metal Square End Mill - Single End, Uncoated, Spiral Flute, 50° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 660

Item #: 75020180
Brand: OSG
Model #: 6603100
Exact Tooling IR#: 04

Features and Benefits

Powdered Metal (PM) is tougher and more cost effective than solid carbide. It is commonly used on highly abrasive materials including high silicon aluminums.

Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.

Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.

Product Specifications
Mill Diameter (Inch)	3/4
Mill Diameter (Decimal Inch)	0.7500
Number of Flutes	3
Length of Cut (Inch)	1-5/8
Length of Cut (Decimal Inch)	1.6250
Material	Powdered Metal
Finish/Coating	Uncoated
Shank Diameter (Inch)	3/4
Single or Double End	Single
Overall Length (Inch)	3-7/8
Center Cutting	Center Cutting
Flute Direction	Right Hand
Cutting Direction	Right Hand
Helix Angle	50.00
Flute Type	Spiral
Length Type	Regular
Helix Style	High
Chipbreaker	No
Extended Reach	No
Series/List	660

Product Specifications

Mill Diameter (Inch) 3/4

Mill Diameter (Decimal Inch) 0.7500

Number of Flutes 3

Length of Cut (Inch) 1-5/8

Length of Cut (Decimal Inch) 1.6250

Material Powdered Metal

Finish/Coating Uncoated

Shank Diameter (Inch) 3/4

Single or Double End Single

Overall Length (Inch) 3-7/8

Center Cutting Center Cutting

Flute Direction Right Hand

Cutting Direction Right Hand

Helix Angle 50.00

Flute Type Spiral

Length Type Regular

Helix Style High

Chipbreaker No

Extended Reach No

Series/List 660

$128.46

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

M.A. Ford - 5/8", 3/4" LOC, 5/8" Shank Diam, 3-1/2" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, ALtima Finish, Spiral Flute, 36° Helix, Centercutting, Right Hand Cut, Right Hand Flute

Item #: 58245267
Brand: M.A. Ford
Model #: 13862500A
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

ALtima is a stronger designed AlTiN coating. is commonly used on hardened steels, stainless steel, titanium alloy and other difficult-to-machine materials. ALtima is a proprietary coating exclusive to M.A. Ford Mfg. Co., Inc.

Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.

Product Specifications
Mill Diameter (Inch)	5/8
Mill Diameter (Decimal Inch)	0.6250
Number of Flutes	3
Length of Cut (Inch)	3/4
Length of Cut (Decimal Inch)	0.7500
Material	Solid Carbide
Finish/Coating	ALtima
Shank Diameter (Inch)	5/8
Single or Double End	Single
Overall Length (Inch)	3-1/2
Center Cutting	Center Cutting
Flute Direction	Right Hand
Cutting Direction	Right Hand
Helix Angle	36.00
Flute Type	Spiral
Length Type	Stub
Helix Style	Medium High
Mill Diameter Tolerance (Decimal Inch)	+0.0000 to -0.0005
Minimum Helix Angle	36
Maximum Helix Angle	36
Additional Information	Modified Standard, Non-Returnable & Non-Cancelable
Chipbreaker	No
Extended Reach	No

Product Specifications

Mill Diameter (Inch) 5/8

Mill Diameter (Decimal Inch) 0.6250

Number of Flutes 3

Length of Cut (Inch) 3/4

Length of Cut (Decimal Inch) 0.7500

Material Solid Carbide

Finish/Coating ALtima

Shank Diameter (Inch) 5/8

Single or Double End Single

Overall Length (Inch) 3-1/2

Center Cutting Center Cutting

Flute Direction Right Hand

Cutting Direction Right Hand

Helix Angle 36.00

Flute Type Spiral

Length Type Stub

Helix Style Medium High

Mill Diameter Tolerance (Decimal Inch) +0.0000 to -0.0005

Minimum Helix Angle 36

Maximum Helix Angle 36

Additional Information Modified Standard, Non-Returnable & Non-Cancelable

Chipbreaker No

Extended Reach No

$128.46

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

RobbJack - 5/8", 7/8" LOC, 5/8" Shank Diam, 3-1/2" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series TS-401

Item #: 03035128
Brand: RobbJack
Model #: TS-401-20
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.

Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.

Product Specifications
Mill Diameter (Inch)	5/8
Mill Diameter (Decimal Inch)	0.6250
Number of Flutes	4
Length of Cut (Inch)	7/8
Length of Cut (Decimal Inch)	0.8750
Material	Solid Carbide
Finish/Coating	Uncoated
Shank Diameter (Inch)	5/8
Single or Double End	Single
Overall Length (Inch)	3-1/2
Center Cutting	Center Cutting
Flute Direction	Right Hand
Cutting Direction	Right Hand
Helix Angle	30.00
Flute Type	Spiral
Length Type	Stub
Mill Diameter Tolerance (Decimal Inch)	+0.000/-0.003
Chipbreaker	No
Extended Reach	No
Overall Length Tolerance (Decimal Inch)	+0.060/-0.060
Shank Diameter Tolerance (Decimal Inch)	-0.0001/-0.0002
Series/List	TS-401

Product Specifications

Mill Diameter (Inch) 5/8

Mill Diameter (Decimal Inch) 0.6250

Number of Flutes 4

Length of Cut (Inch) 7/8

Length of Cut (Decimal Inch) 0.8750

Material Solid Carbide

Finish/Coating Uncoated

Shank Diameter (Inch) 5/8

Single or Double End Single

Overall Length (Inch) 3-1/2

Center Cutting Center Cutting

Flute Direction Right Hand

Cutting Direction Right Hand

Helix Angle 30.00

Flute Type Spiral

Length Type Stub

Mill Diameter Tolerance (Decimal Inch) +0.000/-0.003

Chipbreaker No

Extended Reach No

Overall Length Tolerance (Decimal Inch) +0.060/-0.060

Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0002

Series/List TS-401

$128.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hertel - 5/8" Diam, Coarse Pitch, 2-1/2" LOC, 4 Flute Cobalt Roughing Square End Mill - TiAlN Finish, 4-5/8" OAL, 5/8" Shank Diam, Single End, Centercutting, 30° Helix

Item #: 62888755
Brand: Hertel
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.

Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.

Product Specifications
Mill Diameter (Inch)	5/8
Mill Diameter (Decimal Inch)	0.6250
Number of Flutes	4
Pitch	Coarse
Length of Cut (Inch)	2-1/2
Length of Cut (Decimal Inch)	2.5000
Shank Diameter (Inch)	5/8
End Type	Square End
Material	Cobalt
Finish/Coating	TiAlN
Overall Length (Inch)	4-5/8
Centercutting	Center Cutting
Helix Angle	30.00
Extended Reach	No
Material Grade	M42
Single or Double End	Single
Cutting Direction	Right Hand
Flute Direction	Right Hand
Flute Type	Spiral
Overall Length (Decimal Inch)	4.6250

Product Specifications

Mill Diameter (Inch) 5/8

Mill Diameter (Decimal Inch) 0.6250

Number of Flutes 4

Pitch Coarse

Length of Cut (Inch) 2-1/2

Length of Cut (Decimal Inch) 2.5000

Shank Diameter (Inch) 5/8

End Type Square End

Material Cobalt

Finish/Coating TiAlN

Overall Length (Inch) 4-5/8

Centercutting Center Cutting

Helix Angle 30.00

Extended Reach No

Material Grade M42

Single or Double End Single

Cutting Direction Right Hand

Flute Direction Right Hand

Flute Type Spiral

Overall Length (Decimal Inch) 4.6250

$133.58

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Corner Radius End Mill: 5/16″ Dia, 13/16″ LOC, 0.015″ Radius, 2 Flutes, Solid Carbide 2-1/2″ OAL, 5/16″ Shank Dia, 30 ° Helix, Bright/Uncoated, Corner Radius End, Centercutting, Series 121

Item #: 00427351
Brand: M.A. Ford?
Model #: 12131251

$55.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Wika - 2-1/2" Dial, 1/4 Thread, 0-300 Scale Range, Pressure Gauge - Center Back Connection Mount, Accurate to 1.5% of Scale

Item #: 56454804
Brand: Wika
Model #: 9833213
Exact Tooling IR#: 04

Features and Benefits

Analog dials resemble a clock face, with a needle to indicate the pressure.

Product Specifications
Type	Liquid-Filled
Scale Measurement Ranges	0-300
Dial Diameter (Inch)	2-1/2
Connection / Mount	Center Back
Accuracy (%)	1.50
Case Material	Stainless Steel
Dial Type	Analog
Thread Size (Inch)	1/4
Liquid Filled	Yes
Material Grade	316
Maximum PSI	300

Product Specifications

Type Liquid-Filled

Scale Measurement Ranges 0-300

Dial Diameter (Inch) 2-1/2

Connection / Mount Center Back

Accuracy (%) 1.50

Case Material Stainless Steel

Dial Type Analog

Thread Size (Inch) 1/4

Liquid Filled Yes

Material Grade 316

Maximum PSI 300

$128.43

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Fowler - 1" Range, 0-25-0 (Balanced), 0-50 (Continuous) Dial Reading, 0.0005" Graduation Dial Drop Indicator - 2-1/4" Dial, 0.05" Range per Revolution, Revolution Counter

Item #: 06770796
Brand: Fowler
Model #: 52-520-129
Exact Tooling IR#: 04

Product Specifications
Maximum Measurement (Decimal Inch)	1.0000
Dial Graduation (Decimal Inch)	0.000500
Dial Reading	0-25-0 (Balanced); 0-50 (Continuous)
Dial Diameter (Inch)	2-1/4
Dial Color	White
Range Per Revolution (Decimal Inch)	0.0500
Revolution Counter	Yes
Back Type	Lug

$156.39

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

De-Sta-Co - Urethane Bar Stock - 12" OAL, Use with End Effector Systems, Includes Insulation Plate

Item #: 68509892
Brand: De-Sta-Co
Model #: CPI-BS-4-2-1-12
Exact Tooling IR#: 04

Product Specifications
Product Type	Bar Stock
Product Orientation	Horizontal
Body Material	Urethane
Overall Length (mm)	304.80
Overall Length (Inch)	12
Overall Length (Decimal Inch)	12
Includes	Insulation Plate
For Use With	End Effector System

$128.42

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Edsal - 60" Wide, Open Shelving Extra Shelf - 24" Deep, Use with Edsal Extra Heavy Duty

Item #: 00307462
Brand: Edsal
Model #: 1207-S1
Exact Tooling IR#: 04

Product Specifications
Type	5-Shelf High Capacity Storage Racks
For Use With	Edsal Extra Heavy Duty
Width (Inch)	60
Style	Extra Shelf
Depth (Inch)	24

$128.42

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

80/20 Inc. - 1 Inch Wide x 2-1/8 Inch High x 3 Inch Deep Double Horizontal Base - 1.004 Inch Hole x 0.257 Inch Bolt Hole Diameter

Item #: 06036321
Brand: 80/20 Inc.
Model #: 5910-HW
Exact Tooling IR#: 04

Product Specifications
Type	Double Horizontal Base
Hole Size	1.0040
Width	1.0000
Depth	3.0000
Overall Height (Decimal Inch)	2.1250
Bolt Hole Diameter (Decimal Inch)	0.2570
Base Height (Decimal Inch)	0.50
Series	10

$128.43

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Eagle MHC - 54" Wide, 14 High, Open Shelving Accessory/Component - Steel with Epoxy Coating, Epoxy Coated Finish, Use with Eagle MHC Shelving

Item #: 41553785
Brand: Eagle MHC
Model #: QA1454E
Exact Tooling IR#: 04

Product Specifications
Type	Shelf
For Use With	Eagle MHC Shelving
Width (Inch)	54
Width (Feet)	4.50
Height (Feet)	1.167
Height (Inch)	14
Load Capacity (Lb.)	800.000
Color	Green Epoxy
Finish/Coating	Epoxy Coated
Material	Steel w/Epoxy Coating

$128.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Eagle MHC - 60" Wide, 14 High, Open Shelving Accessory/Component - Steel with Epoxy Coating, Epoxy Coated Finish, Use with Eagle MHC Shelving

Item #: 41553801
Brand: Eagle MHC
Model #: QA1460V
Exact Tooling IR#: 04

Product Specifications
Type	Shelf
For Use With	Eagle MHC Shelving
Width (Inch)	60
Width (Feet)	5.00
Height (Feet)	1.167
Height (Inch)	14
Load Capacity (Lb.)	800.000
Color	Gray Epoxy
Finish/Coating	Epoxy Coated
Material	Steel w/Epoxy Coating

$128.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Caster Connection - 8" Diam x 2" Wide x 9-1/2" OAH Top Plate Mount Swivel Caster - Polyurethane on Aluminum, 1,200 Lb Capacity, Sealed Precision Ball Bearing, 4 x 4-1/2" Plate

Item #: 47172903
Brand: Caster Connection
Model #: CDP-MSC-24
Exact Tooling IR#: 04

Product Specifications
Mount	Top Plate
Style	Swivel
Wheel Diameter (Inch)	8
Wheel Width (Inch)	2
Overall Height (Inch)	9-1/2
Load Capacity (Lb.)	1200
Wheel Material Type	Rubber
Plate Size (Inch)	4 x 4-1/2
Bearing Type	Sealed Precision Ball Bearing
Wheel Material	Polyurethane on Aluminum

$128.46

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Eagle MHC - 54" Wide, 18 High, Open Shelving Accessory/Component - Steel Chrome Plated, Chrome Finish, Use with Eagle MHC Shelving

Item #: 41553165
Brand: Eagle MHC
Model #: QA1854C
Exact Tooling IR#: 04

Product Specifications
Type	Shelf
For Use With	Eagle MHC Shelving
Width (Inch)	54
Width (Feet)	4.50
Height (Feet)	1.500
Height (Inch)	18
Load Capacity (Lb.)	800.000
Color	Chrome
Finish/Coating	Chrome
Material	Steel Chrome Plated

$128.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Eagle MHC - 60" Wide, 14 High, Open Shelving Accessory/Component - Steel with Epoxy Coating, Epoxy Coated Finish, Use with Eagle MHC Shelving

Item #: 41552928
Brand: Eagle MHC
Model #: QA1460VG
Exact Tooling IR#: 04

Product Specifications
Type	Shelf
For Use With	Eagle MHC Shelving
Width (Inch)	60
Width (Feet)	5.00
Height (Feet)	1.167
Height (Inch)	14
Load Capacity (Lb.)	800.000
Color	Green Epoxy
Finish/Coating	Epoxy Coated
Material	Steel w/Epoxy Coating

$128.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Eagle MHC - 48" Wide, 1-1/8 High, Open Shelving Accessory/Component - Steel Chrome Plated, Chrome Finish, 21" Deep, Use with Eagle MHC Shelving

Item #: 41541939
Brand: Eagle MHC
Model #: QA2148C
Exact Tooling IR#: 04

Product Specifications
Type	Shelf
For Use With	Eagle MHC Shelving
Width (Inch)	48
Width (Feet)	4.00
Height (Feet)	0.094
Height (Inch)	1-1/8
Depth (Inch)	21.0000
Load Capacity (Lb.)	800.000
Color	Chrome
Finish/Coating	Chrome
Material	Steel Chrome Plated

$128.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It