Email: sales@alltoolandsupply.com | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

MSC Up To 2022 Part 4 - (149636 Products)

Browning - 2-1/4" ID x 4.3307" OD, 11,789 Lb Dynamic Capacity, ER Style Insert Bearing - 52100 Steel Insert, 1-1/4" Race Width, 8,150 Lb Static Capacity - All Tool & Supply

Browning - 2-1/4" ID x 4.3307" OD, 11,789 Lb Dynamic Capacity, ER Style Insert Bearing - 52100 Steel Insert, 1-1/4" Race Width, 8,150 Lb Static Capacity


Item #: 60604824
Brand: Browning
Model #: VER-236
Exact Tooling IR#: 04

Product Specifications
Type. ER Style
Inside Diameter (Inch) 2-1/4
Outside Diameter (Decimal Inch) 4.3307
Outside Diameter (Inch) 4.333
Overall Width (Decimal Inch) 2.5630
Overall Width (Inch) 2-9/16
Race Width (Decimal Inch) 1.2500
Race Width (Inch) 1-1/4
Dynamic Load Capacity (Pounds) 11789
Static Load Capacity (Pounds) 8150.00
Insert Material 52100 Steel

$130.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Climax Metal Products - 4" Bore, Steel, One Piece Solid Set Screw Collars - 5-1/4" Outside Diam, 1-1/8" Wide - All Tool & Supply

Climax Metal Products - 4" Bore, Steel, One Piece Solid Set Screw Collars - 5-1/4" Outside Diam, 1-1/8" Wide


Item #: 73090888
Brand: Climax Metal Products
Model #: MOD C-400-BO
Exact Tooling IR#: 04

Product Specifications
Style One Piece
Type Solid Set Screw Collars
Bore Size (Decimal Inch) 4.0000
Bore Size (Inch) 4
Outside Diameter (Inch) 5-1/4
Width (Inch) 1-1/8
Material Steel
Finish/Coating Black Oxide

$150.02

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

U.S. Tsubaki - 22 Teeth, 5/8" Chain Pitch, Chain Size 50, Finished Bore Sprocket - 1-7/16" Bore Diam, 4.392" Pitch Diam, 4.72" Outside Diam - All Tool & Supply

U.S. Tsubaki - 22 Teeth, 5/8" Chain Pitch, Chain Size 50, Finished Bore Sprocket - 1-7/16" Bore Diam, 4.392" Pitch Diam, 4.72" Outside Diam


Item #: 55225890
Brand: U.S. Tsubaki
Model #: 50B22F-1G
Exact Tooling IR#: 04

Product Specifications
Type Finished Bore Sprocket
Number of Teeth 22
Chain Pitch (Inch) 0.625
Chain Size Number 50
Bore Diameter (Inch) 1-7/16
Bore Diameter (mm) 1.438
Outside Diameter (Decimal Inch) 4.7200
Pitch Diameter (Decimal Inch) 4.3920
PSC Code 3020

$130.26

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 20mm Diam, 1000mm Long, 1045 Steel Keyed Round Linear Shafting - 6mm Key - All Tool & Supply

Made in USA - 20mm Diam, 1000mm Long, 1045 Steel Keyed Round Linear Shafting - 6mm Key


Item #: 85511947
Brand: Made in USA
Exact Tooling IR#: 04

Product Specifications
Style Keyed
Diameter (mm) 20.0000
Length (Inch) 39
Length (mm) 1000.00
Material Steel
Material Grade 1045
Key Size (mm) 6.000

$130.48

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 1" ID, 34mm OAL x 2-3/4" OAH Pillow Block Tap Base - 1,764 Lb Static Cap, 3,147 Lb Dyn Cap, 2" Btw Mnt Hole Ctrs, Stainless Steel - All Tool & Supply

Value Collection - 1" ID, 34mm OAL x 2-3/4" OAH Pillow Block Tap Base - 1,764 Lb Static Cap, 3,147 Lb Dyn Cap, 2" Btw Mnt Hole Ctrs, Stainless Steel


Item #: 05600739
Brand: Value Collection
Exact Tooling IR#: 04

Product Specifications
Type Pillow Block Tap Base
Inside Diameter (Decimal Inch) 1.0000
Inside Diameter (Inch) 1
Width (Decimal Inch) 1.3386
Width (mm) 34.00
Overall Length (mm) 34.0000
Overall Length (Decimal Inch) 2.7813
Overall Height (Inch) 2-3/4
Overall Height (Decimal Inch) 2.7813
Overall Height (mm) 69.85000
Static Load Capacity (Pounds) 1764.00
Dynamic Load Capacity (Pounds) 3147
Distance Between Mounting Hole Centers (Decimal Inch) 2.0000
Material Stainless Steel
Bolt Size (Inch) 3/8
Bolt Size (Decimal Inch) 0.3750

$130.31

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - Section V, V-Belt - Neoprene Rubber, Variable Speed, No. 4430V740 - All Tool & Supply

Value Collection - Section V, V-Belt - Neoprene Rubber, Variable Speed, No. 4430V740


Item #: 35397405
Brand: Value Collection
Exact Tooling IR#: 04

Product Specifications
Belt Style V-Belts
Belt Section V
Belt Number 4430V740
Material Neoprene Rubber
Style Variable Speed

$130.25

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 5/16", 13/16" LOC, 5/16" Shank Diam, 2-1/2" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, FIREX Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3089 - All Tool & Supply

Guhring - 5/16", 13/16" LOC, 5/16" Shank Diam, 2-1/2" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, FIREX Finish, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3089


Item #: 58540238
Brand: Guhring
Model #: 9030890079460
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
FIREX is a multi-layer coating that combines the characteristics of universal applicability of TiN, the heat resistance of TiAlN and the shock resistance of TiCN. FIREX is a proprietary coating exclusive to Guhring, Inc.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 5/16
Mill Diameter (Decimal Inch) 0.3125
Number of Flutes 4
Length of Cut (Inch) 13/16
Length of Cut (Decimal Inch) 0.8125
Material Solid Carbide
Finish/Coating FIREX
Shank Diameter (Inch) 5/16
Single or Double End Single
Overall Length (Inch) 2-1/2
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Material Grade Ultra Fine Grain
Chipbreaker No
Extended Reach No
Series/List 3089

$65.65

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 23/64", 7/8" LOC, 3/8" Shank Diam, 2-1/2" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 402 - All Tool & Supply

OSG - 23/64", 7/8" LOC, 3/8" Shank Diam, 2-1/2" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 402


Item #: 55466767
Brand: OSG
Model #: 402-359411
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 23/64
Mill Diameter (Decimal Inch) 0.3594
Number of Flutes 2
Length of Cut (Inch) 7/8
Length of Cut (Decimal Inch) 0.8750
Material Solid Carbide
Finish/Coating TiAlN
Shank Diameter (Inch) 3/8
Single or Double End Single
Overall Length (Inch) 2-1/2
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Chipbreaker No
Extended Reach No
Series/List 402

$40.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 1/2", 1-5/8" LOC, 1/2" Shank Diam, 4" OAL, 7 Flute, Solid Carbide Square End Mill - Single End, nACRo Finish, Spiral Flute, 37.50° Helix, Centercutting, Right Hand Cut, Right Hand Flute - All Tool & Supply

Accupro - 1/2", 1-5/8" LOC, 1/2" Shank Diam, 4" OAL, 7 Flute, Solid Carbide Square End Mill - Single End, nACRo Finish, Spiral Flute, 37.50° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 58750373
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
nACRo is a nanocomposite coating that is extremely wear and heat resistant. It is commonly used on steel, hardened steel, aluminum alloy and cast iron.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
Number of Flutes 7
Length of Cut (Inch) 1-5/8
Length of Cut (Decimal Inch) 1.6250
Material Solid Carbide
Finish/Coating nACRo
Shank Diameter (Inch) 1/2
Single or Double End Single
Overall Length (Inch) 4
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 37.50
Flute Type Spiral
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.002
Material Grade Micrograin
Additional Information Variable Index
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004

$135.46

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

ProMax - 3/4", 1" LOC, 3/4" Shank Diam, 3" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, AlTiN Finish, Spiral Flute, 40° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 155 - All Tool & Supply

ProMax - 3/4", 1" LOC, 3/4" Shank Diam, 3" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, AlTiN Finish, Spiral Flute, 40° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 155


Item #: 02829075
Brand: ProMax
Model #: 155-04824
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest coatings. It is commonly used for machining aircraft and aerospace material, nickel alloys, stainless steel, titanium, cast iron and carbon steel.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 3/4
Mill Diameter (Decimal Inch) 0.7500
Number of Flutes 4
Length of Cut (Inch) 1
Length of Cut (Decimal Inch) 1.0000
Material Solid Carbide
Finish/Coating AlTiN
Shank Diameter (Inch) 3/4
Single or Double End Single
Overall Length (Inch) 3
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 40.00
Flute Type Spiral
Length Type Stub
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.002
Material Grade Micrograin
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004
Series/List 155

$136.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Kennametal - 1/2", 1-1/4" LOC, 1/2" Shank Diam, 3" OAL, 6 Flute, Solid Carbide Square End Mill - Single End, AlTiN Finish, Spiral Flute, 38° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series UJDE - All Tool & Supply

Kennametal - 1/2", 1-1/4" LOC, 1/2" Shank Diam, 3" OAL, 6 Flute, Solid Carbide Square End Mill - Single End, AlTiN Finish, Spiral Flute, 38° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series UJDE


Item #: 61905386
Brand: Kennametal
Model #: 5351827
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest coatings. It is commonly used for machining aircraft and aerospace material, nickel alloys, stainless steel, titanium, cast iron and carbon steel.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
Number of Flutes 6
Length of Cut (Inch) 1-1/4
Length of Cut (Decimal Inch) 1.2500
Material Solid Carbide
Finish/Coating AlTiN
Shank Diameter (Inch) 1/2
Single or Double End Single
Overall Length (Inch) 3
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 38.00
Flute Type Spiral
Length Type Stub
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.002
Manufacturer Grade KCSM15
Additional Information SAFE-LOCK shank
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (Decimal Inch) +0.0000/-0.00043
Series/List UJDE

$130.22

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Cleveland - 5/8", 1-5/8" LOC, 5/8" Shank Diam, 3-1/4" OAL, 4 Flute, High Speed Steel Square End Mill - Single End, TiN Finish, Spiral Flute, 30° Helix, Left Hand Cut, Left Hand Flute, Series HG-4LL - All Tool & Supply

Cleveland - 5/8", 1-5/8" LOC, 5/8" Shank Diam, 3-1/4" OAL, 4 Flute, High Speed Steel Square End Mill - Single End, TiN Finish, Spiral Flute, 30° Helix, Left Hand Cut, Left Hand Flute, Series HG-4LL


Item #: 87388534
Brand: Cleveland
Model #: C33616
Exact Tooling IR#: 04

Features and Benefits

High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 5/8
Mill Diameter (Decimal Inch) 0.6250
Number of Flutes 4
Length of Cut (Inch) 1-5/8
Length of Cut (Decimal Inch) 1.6250
Material High Speed Steel
Finish/Coating TiN
Shank Diameter (Inch) 5/8
Single or Double End Single
Overall Length (Inch) 3-1/4
Center Cutting NonCenter Cutting
Flute Direction Left Hand
Cutting Direction Left Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Chipbreaker No
Extended Reach No
Series/List HG-4LL

$130.31

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Interstate - 1-1/16", 1-5/8" LOC, 3/4" Shank Diam, 3-7/8" OAL, 6 Flute, Cobalt Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute - All Tool & Supply

Interstate - 1-1/16", 1-5/8" LOC, 3/4" Shank Diam, 3-7/8" OAL, 6 Flute, Cobalt Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 01881655
Brand: Interstate
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1-1/16
Mill Diameter (Decimal Inch) 1.0625
Number of Flutes 6
Length of Cut (Inch) 1-5/8
Length of Cut (Decimal Inch) 1.6250
Material Cobalt
Finish/Coating Uncoated
Shank Diameter (Inch) 3/4
Single or Double End Single
Overall Length (Inch) 3-7/8
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Material Grade M42
Chipbreaker No
Extended Reach No

$130.29

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

M.A. Ford - 14mm, 30mm LOC, 14mm Shank Diam, 89mm OAL, 4 Flute, Solid Carbide Square End Mill - Single End, Uncoated, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 111 - All Tool & Supply

M.A. Ford - 14mm, 30mm LOC, 14mm Shank Diam, 89mm OAL, 4 Flute, Solid Carbide Square End Mill - Single End, Uncoated, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 111


Item #: 70028147
Brand: M.A. Ford
Model #: 11155120
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 14.00
Mill Diameter (Decimal Inch) 0.5512
Number of Flutes 4
Length of Cut (mm) 30.00
Length of Cut (Decimal Inch) 1.1810
Material Solid Carbide
Finish/Coating Uncoated
Shank Diameter (mm) 14.00
Single or Double End Single
Overall Length (mm) 89.00
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Chipbreaker No
Extended Reach No
Series/List 111

$130.37

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 3/4", 3 Flute, Single End, Solid Carbide, 0.015" Corner Radius End Mill - 4" OAL, 40° Helix, Right Hand Flute, 1-1/2" LOC, Right Hand Cut - All Tool & Supply

Accupro - 3/4", 3 Flute, Single End, Solid Carbide, 0.015" Corner Radius End Mill - 4" OAL, 40° Helix, Right Hand Flute, 1-1/2" LOC, Right Hand Cut


Item #: 08481962
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Mill Diameter (Inch) 3/4
Mill Diameter (Decimal Inch) 0.7500
End Type Corner Radius
Corner Radius (Decimal Inch) 0.0150
Number of Flutes 3
Material Solid Carbide
Finish/Coating Uncoated
Length of Cut (Inch) 1-1/2
Length of Cut (Decimal Inch) 1.5000
Shank Diameter (Inch) 3/4
Overall Length (Inch) 4
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle 40.00
Material Grade Micrograin
Single or Double End Single
Centercutting Yes
Flute Direction Right Hand
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.0025
Corner Radius Tolerance (Decimal Inch) +/-0.0015
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004
Extended Reach No

$135.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 16mm, 32mm LOC, 16mm Shank Diam, 89mm OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiCN Finish, Spiral Flute, 40° Helix, Centercutting, Right Hand Cut, Right Hand Flute - All Tool & Supply

Accupro - 16mm, 32mm LOC, 16mm Shank Diam, 89mm OAL, 2 Flute, Solid Carbide Square End Mill - Single End, TiCN Finish, Spiral Flute, 40° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 01216928
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steels, cast iron and aluminum alloys.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 16.00
Mill Diameter (Decimal Inch) 0.6299
Number of Flutes 2
Length of Cut (mm) 32.00
Length of Cut (Decimal Inch) 1.2598
Material Solid Carbide
Finish/Coating TiCN
Shank Diameter (mm) 16.00
Single or Double End Single
Overall Length (mm) 89.00
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 40.00
Flute Type Spiral
Length Type Regular
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.002
Material Grade Micrograin
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004

$135.54

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Keo - 3" Diam x 5/8" Width of Cut, 20 Teeth, High Speed Steel Side Milling Cutter - Straight Teeth, Uncoated - All Tool & Supply

Keo - 3" Diam x 5/8" Width of Cut, 20 Teeth, High Speed Steel Side Milling Cutter - Straight Teeth, Uncoated


Item #: 44105625
Brand: Keo
Model #: 05210
Exact Tooling IR#: 04

Features and Benefits

Straight tooth cutters are used for general purpose applications and where a deeper cut is not required. They have more teeth than staggered cutters for a finer finish on the workpiece.
High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Cutter Diameter (Inch) 3
Cutting Width (Inch) 5/8
Cutting Width (Decimal Inch) 0.6250
Tooth Configuration Straight
Material High Speed Steel
Finish/Coating Uncoated
Arbor Hole Diameter (Inch) 1
Number of Teeth 20
Helix Angle 0.00
Radial Rake Angle +10

$130.19

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 1/2" Diam, 1" LOC, 4 Flute Solid Carbide Roughing & Finishing Square End Mill - AlTiN Finish, 3" OAL, 1/2" Shank Diam, Straight Shank, 40° Helix, Centercutting - All Tool & Supply

Accupro - 1/2" Diam, 1" LOC, 4 Flute Solid Carbide Roughing & Finishing Square End Mill - AlTiN Finish, 3" OAL, 1/2" Shank Diam, Straight Shank, 40° Helix, Centercutting


Item #: 00037911
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastic and other tough-to-machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
End Type Square
Number of Flutes 4
Material Solid Carbide
Finish/Coating AlTiN
Length of Cut (Inch) 1
Length of Cut (Decimal Inch) 1.0000
Shank Diameter (Inch) 1/2
Overall Length (Inch) 3
Centercutting Center Cutting
Extended Reach NonExtendedReach
Chipbreaker Yes
Shank Type Straight Shank
Helix Angle 40
Material Grade Micrograin
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand

$135.55

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 10mm, 30mm LOC, 10mm Shank Diam, 80mm OAL, 4 Flute, Solid Carbide Square End Mill - Single End, FIREX Finish, Spiral Flute, 30/32° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 3522 - All Tool & Supply

Guhring - 10mm, 30mm LOC, 10mm Shank Diam, 80mm OAL, 4 Flute, Solid Carbide Square End Mill - Single End, FIREX Finish, Spiral Flute, 30/32° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 3522


Item #: 58553827
Brand: Guhring
Model #: 9035220100000
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
FIREX is a multi-layer coating that combines the characteristics of universal applicability of TiN, the heat resistance of TiAlN and the shock resistance of TiCN. FIREX is a proprietary coating exclusive to Guhring, Inc.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 10.00
Mill Diameter (Decimal Inch) 0.3937
Number of Flutes 4
Length of Cut (mm) 30.00
Length of Cut (Decimal Inch) 1.1811
Material Solid Carbide
Finish/Coating FIREX
Shank Diameter (mm) 10.00
Single or Double End Single
Overall Length (mm) 80.00
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00/32.00
Flute Type Spiral
Length Type Long
Material Grade Ultra Fine Grain
Reach Length (mm) 40.00
Chipbreaker No
Extended Reach Yes
Series/List 3522

$130.26

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Interstate - 1-1/8", 1-1/2" LOC, 3/4" Shank Diam, 3-7/8" OAL, 6 Flute, Cobalt Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute - All Tool & Supply

Interstate - 1-1/8", 1-1/2" LOC, 3/4" Shank Diam, 3-7/8" OAL, 6 Flute, Cobalt Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 01881663
Brand: Interstate
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1-1/8
Mill Diameter (Decimal Inch) 1.1250
Number of Flutes 6
Length of Cut (Inch) 1-1/2
Length of Cut (Decimal Inch) 1.5000
Material Cobalt
Finish/Coating Uncoated
Shank Diameter (Inch) 3/4
Single or Double End Single
Overall Length (Inch) 3-7/8
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Material Grade M42
Chipbreaker No
Extended Reach No

$130.29

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It