Raw Materials > Shim Stock (ET04) - (2454 Products)
Raw Materials > Shim Stock (ET04)
.018X12X120″ STEEL SHIM
Item #: MA5216570
Brand: Precision Brand
Model #: 16AA18
Product Specifications
Type
Roll
Width
12″
Material
Steel
Thickness
0.018″
Length
120″
Standard Pack
1
Remarks
•Steel Shim is made from a full hard, cold rolled, low carbon 1008-1010 steel.•Precision Brand? is the only manufacturer to offer Branded? shim.•It has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.•Used in applications where hardness, flatness and accuracy are required.•Material can be punched or sheared with minimum burring and distortion.•Precision Brand? Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses.•It is especially useful for pilot production runs where material accuracy and economy are important.•All Precision Brand? shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Country of Origin
USA
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.020X20X24 LAM SS SHIM
Item #: MA5272020
Brand: Precision Brand
Model #: 72020
Product Specifications
Type
Laminated Shim
Width
20″
Material
Stainless Steel
Thickness
0.020″
Length
24″
Standard Pack
1
Remarks
•Laminated Stainless Steel Shim is made from an annealed 300 Series Stainless .•Composition 3, Type 1, Class 1.•Fully •Laminated.•Peel off layers to needed thickness.•Allows more on-site accuracy.•Precision Brand? •Laminated Shim is made by using pressure and resin/adhesive to bond metal shim together which creates a rigid "one piece" item that appears to function as a single solid metal sheet or plate.•Remove layers by peeling away with a pocket knife to the desired thickness.•Sheets may be cut, sawed, stamped, milled, or bored to almost any configuration.•Bonding adhesive makes for just right peeling, no tearing or ripping of the layers.•Sheets are uniform from edge to edge.
Country of Origin
USA
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.013″ 1/4 LB COIL MUSIC
Item #: MA5221213
Brand: Precision Brand
Model #: 21213
Product Specifications
Type
1/4 lb Coil Wire
Thickness
0.013″
Material
Steel
Standard Pack
1
Length
1/4 lb
Remarks
•Precision Brand? Music Wire is spring tempered and made from high carbon steel alloy.•High tensile strength and high fatigue resistance.•Applications include springs, wire forms, control linkages, armature binding, ceramic cutting, and a variety of industrial uses.•
Country of Origin
DE
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.50MMX150MMX2.5MM BRASS
Item #: MA5217978
Brand: Precision Brand
Model #: 17978
Product Specifications
Type
Roll
Width
150 mm
Material
Brass
Thickness
0.50 mm
Length
2.5 mm
Standard Pack
1
Remarks
•Brass Shim is made from a half hard, cold rolled, 260 alloy •Brass.•Precision Brand? is the only manufacturer to offer Branded? shim.•It has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.•Used in applications where corrosion problems exist; low magnetic permeability.•Excellent forming qualities and may be lightly drawn, blanked or stamped.•Precision Brand? Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses.•It is especially useful for pilot production runs where material accuracy and economy are important.•All Precision Brand? shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Country of Origin
USA
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.30MMX150MMX2.5MM BRASS
Item #: MA5217976
Brand: Precision Brand
Model #: 17976
Product Specifications
Type
Roll
Width
150 mm
Material
Brass
Thickness
0.30 mm
Length
2.5 mm
Standard Pack
1
Remarks
•Brass Shim is made from a half hard, cold rolled, 260 alloy •Brass.•Precision Brand? is the only manufacturer to offer Branded? shim.•It has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.•Used in applications where corrosion problems exist; low magnetic permeability.•Excellent forming qualities and may be lightly drawn, blanked or stamped.•Precision Brand? Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses.•It is especially useful for pilot production runs where material accuracy and economy are important.•All Precision Brand? shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Country of Origin
USA
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.004X12X120″ BRASS SHIM
Item #: MA5217275
Brand: Precision Brand
Model #: 17SS4
Product Specifications
Type
Roll
Width
12″
Material
Brass
Thickness
0.004″
Length
120″
Standard Pack
1
Remarks
•Brass Shim is made from a half hard, cold rolled, 260 alloy •Brass.•Precision Brand? is the only manufacturer to offer Branded? shim.•It has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.•Used in applications where corrosion problems exist; low magnetic permeability.•Excellent forming qualities and may be lightly drawn, blanked or stamped.•Precision Brand? Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses.•It is especially useful for pilot production runs where material accuracy and economy are important.•All Precision Brand? shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Country of Origin
USA
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.008 1 LB. COIL SS WIRE
Item #: MA5229008
Brand: Precision Brand
Model #: 29008
Product Specifications
Type
1 lb Coil Wire
Thickness
0.008″
Material
Stainless Steel
Standard Pack
1
Length
1 lb
Remarks
•Precision Brand? Stainless Steel Wire is spring tempered and made from full hard, 300 series stainless steel.•Excellent corrosion resistant qualities and smooth finish.•Applications include springs, wire forms, control linkages, armature binding, ceramic cutting, and a variety of industrial uses.•
Country of Origin
DE
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.375X4X4 300 SS SLOTTED
Item #: MA5342480
Brand: Precision Brand
Model #: 42480
Product Specifications
Type
Slotted Shim
Width
4″
Material
Stainless Steel
Thickness
0.375″
Length
4″
Standard Pack
1
Remarks
•Made from a 300 series stainless steel that resists rust and corrosion.•Tab makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim.•Each shim marked with thickness in decimal and metric.•Precision Brand? Slotted Shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery.•Slotted shims are economical, safe, and accurate.•Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.
Country of Origin
USA
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.010X8X8 300 SS SLOTTED
Item #: MA5342830
Brand: Precision Brand
Model #: 42830
Product Specifications
Type
Slotted Shim
Width
8″
Material
Stainless Steel
Thickness
0.010″
Length
8″
Standard Pack
5
Remarks
•Made from a 300 series stainless steel that resists rust and corrosion.•Tab makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim.•Each shim marked with thickness in decimal and metric.•Precision Brand? Slotted Shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery.•Slotted shims are economical, safe, and accurate.•Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.
Country of Origin
USA
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.025X6X6 300 SS SLOTTED
Item #: MA5342645
Brand: Precision Brand
Model #: 42645
Product Specifications
Type
Slotted Shim
Width
6″
Material
Stainless Steel
Thickness
0.025″
Length
6″
Standard Pack
5
Remarks
•Made from a 300 series stainless steel that resists rust and corrosion.•Tab makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim.•Each shim marked with thickness in decimal and metric.•Precision Brand? Slotted Shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery.•Slotted shims are economical, safe, and accurate.•Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.
Country of Origin
USA
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.010X6X100 COPPER SHIM
Item #: MA5268450
Brand: Precision Brand
Model #: 68450
Product Specifications
Type
Copper Shim
Width
6″
Material
Copper
Thickness
0.010″
Length
100″
Standard Pack
1
Remarks
•Made from a 110 annealed copper.•Excellent conductor of electricity and heat.•Ductility and malleable attributes makes metalworking easy.•Precision Brand? Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses.•It is especially useful for pilot production runs where material accuracy and economy are important.•All Precision Brand? shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Country of Origin
USA
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.010X6X100 COPPER SHIM
Item #: MA5268450
Brand: Precision Brand
Model #: 68450
Product Specifications
Type
Copper Shim
Width
6″
Material
Copper
Thickness
0.010″
Length
100″
Standard Pack
1
Remarks
•Made from a 110 annealed copper.•Excellent conductor of electricity and heat.•Ductility and malleable attributes makes metalworking easy.•Precision Brand? Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses.•It is especially useful for pilot production runs where material accuracy and economy are important.•All Precision Brand? shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Country of Origin
USA
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.40MM SHORTENING SHIM
Item #: MA5326603
Brand: Precision Brand
Model #: 26603
Product Specifications
Type
Shoulder Screw Shortening Shim
Outside Diameter
9.78 mm
Material
Stainless Steel
Thickness
0.40 mm
Inside Diameter
6 mm
Standard Pack
25
Remarks
•Shortening Shims are precision die cut to fit with close tolerances around the shoulder screw shank to fit under the screw head.•Made from a 302 full hard stainless steel.
Country of Origin
USA
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.80MM LENGTHENING SHIM
Item #: MA5326509
Brand: Precision Brand
Model #: 26509
Product Specifications
Type
Shoulder Screw Lengthening Shim
Outside Diameter
7.95 mm
Material
Stainless Steel
Thickness
0.80 mm
Inside Diameter
5.92 mm
Standard Pack
25
Remarks
•Lengthening Shims fit over the stripper screw threads and under the shoulder which, in effect, lengthens the stripper screw length.•Made from a 302 full hard stainless steel.
Country of Origin
USA
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CGW 5X1/8X5/8-11 A24-R-BF STEEL T27
Item #: MG9035676
Brand: CGW
Model #: 35676
| Product Specifications | |
|---|---|
| Diameter | 5″ |
| Maximum RPM | 12,250 |
| Width | 1/8″ |
| Specification | A24-RBF |
| Arbor Hole | 5/8″-11 |
| Standard Pack | 10 |
| Grit | 24 |
| Type | Depressed Center Wheel |
| Wheel Type | Type 27 |
| Description | Type 27 - Depressed Center Wheel - Cutting/Notching for Metal |
| Abrasive Material | Aluminum Oxide |
| Grade Type | A24-RBF |
| Grade | R |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.037″ 1/4 LB COIL MUSIC
Item #: MA5221237
Brand: Precision Brand
Model #: 21237
Product Specifications
Type
1/4 lb Coil Wire
Thickness
0.037″
Material
Steel
Standard Pack
1
Length
1/4 lb
Remarks
•Precision Brand? Music Wire is spring tempered and made from high carbon steel alloy.•High tensile strength and high fatigue resistance.•Applications include springs, wire forms, control linkages, armature binding, ceramic cutting, and a variety of industrial uses.•
Country of Origin
DE
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3″ × 21″-50 Grit - Zirconia Alumina - Abrasive Belt
Item #: MM4401750Z
Brand: Klingspor
Model #: 411050Y03002104
| Product Specifications | |
|---|---|
| Width | 3″ |
| Backing Material | Cotton |
| Length | 21″ |
| For Use With | Portable Sanders |
| Abrasive Material | Zirconia Alumina |
| Backing Weight | X |
| Grit | 50 |
| Series | CS411 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3″ × 2″ - X-Fine Grit - Rectangular Diameter-Sharp Card Size Sharpener
Item #: MJ6500751
Brand: DMT
Model #: D3E
| Product Specifications | |
|---|---|
| Width | 2″ |
| Shape | Rectangular |
| Overall Length | 3″ |
| Type | Card Size Sharpener |
| Abrasive Material | Diamond |
| Description | Pocket-sized convenience. Sharpens knives faster than conventional stones with DMT®'s monocrystalline diamond surface. No oil is needed-sharpen dry or with water |
| Grade | Extra Fine |
| Model No | D3E |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.65MMX150MMX1.25MM 316 SS
Item #: MA5222645
Brand: Precision Brand
Model #: 22645
Product Specifications
Type
Roll
Width
150 mm
Material
Stainless Steel 316
Thickness
0.65 mm
Length
1.25 mm
Standard Pack
1
Remarks
•Precision Brand 316 Stainless Steel Shim is made from a soft (annealed) temper material.•Type 316 stainless steel has better corrosion resistance to most chemicals, salts, acids, and marine atmospheres due to an addition of 2.0 to 3.0% molybdenum.•Fabrication characteristics of type 316 are similar to type 302 and type 304.•Type 316 is used extensively in chemical and food processing equipment, photographic, pharmaceutical, marine, and textile finishing equipment.•Precision Brand? is the only manufacturer to offer Branded? shim.•Branded? shim is fully traceable and quickly identifiable ? thickness, material type, and lot number are printed right on the shim material.
Country of Origin
USA
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.375X2X2 300 SS SLOTTED
Item #: MA5342280
Brand: Precision Brand
Model #: 42280
Product Specifications
Type
Slotted Shim
Width
2″
Material
Stainless Steel
Thickness
0.375″
Length
2″
Standard Pack
1
Remarks
•Made from a 300 series stainless steel that resists rust and corrosion.•Tab makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim.•Each shim marked with thickness in decimal and metric.•Precision Brand? Slotted Shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery.•Slotted shims are economical, safe, and accurate.•Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.
Country of Origin
USA
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It